Skip to main content
These directions are for installing older releases of
JMRI on OS X.
If you're trying to install JMRI 2.10 or later on OS X, please see the current OS X Install instructions.
If you have a Macintosh running Classic MacOS9.1, refer to the Mac Classic Install Guide.
If you're really sure you want to install an old JMRI release (I'm sure you have a really good reason), on to the show:
Using JMRI requires a combination of hardware (in this case a Mac), Java software and a JMRI download for a specific version.
Mac OS X version 10.4 "Tiger" or later is required for JMRI version 2.4 to 2.8 because those JMRI versions require Java 1.5. There's an Apple web page that lists the computers that are able to run Mac OS X 10.4. If you're still running Mac OS X 10.3 "Panther", you can download and use JMRI version 2.2.
You should have enough memory for your computer to run well, but you don't need any more than that. Starting JMRI with Java may take some time, but once it's running speed is no problem.
The install will take up about 100MB of disk space, mostly for the help pages.
No Macintosh that runs Mac OS X has built-in serial ports, so if your hardware needs a serial connection, you'll have to use a USB-to-Serial adapter.
You will need Mac OS X drivers for the serial hardware you're using. If you're using Mac OS X 10.4 or later, most hardware won't need a separate driver; they're already present in Mac OS X. In some cases you will need a driver, though, so check the manufacturer's website to make sure.
We tested using a Keyspan PDA Adapter; those drivers are available at http://www.keyspan.com/downloads/. Some device drivers will list each port under several names, e.g. starting with "/dev/tty" or "/dev/cu", for example "/dev/tty.KeyUSA19181.1". In that case, you must select the one that starts with "cu", e.g. "/dev/cu.KeyUSA19181.1".
There's a Mac OS X driver for USB-to-Serial adapters based on the Prolific PL2303 chipset available here. If you can't access your USB dongle and it seems to use that chipset (you can check in the USB tab of System Profiler), this driver will make it available as /dev/cu.PL2303-xxx.
See our page on USB adapters for more information
Versions of JMRI before 2.9.2 required that you install communications libraries on your computer.
Although Mac OS X comes with an up-to-date Java, it doesn't include the Java communications libraries. These are needed to talk to a DCC Command Station, so we provide an installer.
If you're using Mac OS X 10.6 (Snow Leopard), you first have to configure Java on Mac OS X for "32 bit" operation. Mac OS X 10.6 can run in either 32-bit or 64-bit mode, but the communications libraries we currently use are only available in 32-bit mode. To do this, open the "Java Preferences" application from the Utilities folder inside the computer's Applications folder, then set the default "Java Application" in the lower window to "Java SE 6 32-bit". Next, download the installer for the default communications library from http://downloads.sourceforge.net/jmri/RXTX-Leopard.pkg.zip (This installer also works for Intel-based Macintoshes running Mac OS X 10.6, even though it's labelled for Leopard). The file name will be RXTX-Leopard.pkg, but the splash screen will say "Tiger" and "10.4" due to an oversight; just ignore that) If the installer doesn't start automatically, double click on the downloaded and expanded file to install it. You will need the Mac OS X administrator password to run the installer.
If you're using Mac OS X 10.5 (Leopard), download the installer for the default communications library from http://downloads.sourceforge.net/jmri/RXTX-Leopard.pkg.zip (This installer works for both PowerPC and Intel-based Macintoshes running Mac OS X 10.5. The file name will be RXTX-Leopard.pkg, but the splash screen will say "Tiger" and "10.4" due to an oversight; just ignore that) If the installer doesn't start automatically, double click on the downloaded and expanded file to install it. You will need the Mac OS X administrator password to run the installer.
f you're using Mac OS X 10.4 (Tiger), download the installer for the default communications library from http://downloads.sourceforge.net/jmri/RXTX-for-Intel-Mac.pkg.zip (This installer works for both PowerPC and Intel-based Macintoshes) Double click on the downloaded and expanded file to install it. You will need the Mac OS X administrator password to run the installer.
If you want to use Mac OS X 10.2 (Jaguar) or 10.3 (Panther) with a much older version of JMRI, download the necessary installer for the default communications library from http://downloads.sourceforge.net/jmri/JavaCommInstaller2.hqx If the installer doesn't start automatically, double click on the downloaded and expanded file to install it. You will need the Mac OS X administrator password to run the installer.
Note that you will have to reinstall the driver and javax.com package if you have to reinstall the system software, or if you do a "clean install" of an OS update.
Download a version of JMRI. If you're on this install page, then that version should be JMRI release 2.8 or earlier. As the version numbers change with every release, this link takes you to the general JMRI download page, where you can select whichever version you like.
Normally, the download will open a new window showing a JMRI folder. If not, double-click the file you downloaded above. This will open a window with the "JMRI" folder.
To install, you just have to move the JMRI folder to where you want it on your computer. Many people put it in "Applications", which is the standard location for this. To do that, just drag the JMRI folder onto the "Applications" icon. If you want to keep it somewhere else, just drag the folder to the desired location.
You can run the program by double-clicking on the "DecoderPro" or "PanelPro" or application icons in the JMRI folder.
Your next step will be to set the Preferences for your particular layout connection.
Mac OS X uses names like "/dev/cu.SomeName" and "/dev/tty.SomeName" for devices, including USB-attached devices like USB-serial converters, LocoBuffer-USBs and similar. Generally, you'll want to use the one that starts with "/dev/cu" if it's present, but see the specific installation page for your particular type of device. Sometimes you can recognize your interface from the right-hand part of the name. If not, the easiest way to find the name for your interface is to disconnect it, start JMRI, write down the list of available devices, close JMRI, reconnect the interface, start JMRI again, and look to see which extra name has appeared. That's the name one you want.
We handle this by making available some alternative libraries, at least one of which is going to make JMRI work.
If you've got Mac OS X 10.4 and are having a problem either getting JMRI to start, or to see the attached layout hardware from within the program, please see this description of how to debug this.
With Mac OS X, JMRI makes this easy to do. PanelPro and DecoderPro save their preferences separately, so they can be configured independently.
On a Mac, the different preferences files take their name from the name of the application icon that's invoked. This lets you create multiple copies of e.g. DecoderPro that each use their own, separate preferences files. Let's say you want one called "CoolNewOne".