Uses of Class
jmri.beans.PropertyChangeSupport

Packages that use PropertyChangeSupport

Package	Description
jmri	Provides basic interfaces and certain core implementations for the JMRI layout management concepts.
jmri.beans	Contains JMRI classes related to supporting JavaBeans and PropertyChangeListeners.
jmri.jmrit.audio	Provides specific implementations of various audio systems.
jmri.jmrit.catalog	Provides a tree-based catalog for browsing.
jmri.jmrit.display.layoutEditor	Layout Editor currently represents both structure and graphical display through a single set of objects.
jmri.jmrit.entryexit	Implements Entry/Exit ( NX ) dispatching using Layout Editor panels.
jmri.jmrit.logix	Support for implementing Warrants in JMRI.
jmri.jmrit.logixng.implementation
jmri.jmrit.operations.automation
jmri.jmrit.operations.automation.actions
jmri.jmrit.operations.locations
jmri.jmrit.operations.locations.divisions
jmri.jmrit.operations.locations.schedules
jmri.jmrit.operations.rollingstock
jmri.jmrit.operations.rollingstock.cars
jmri.jmrit.operations.rollingstock.engines
jmri.jmrit.operations.routes
jmri.jmrit.operations.setup
jmri.jmrit.operations.setup.backup
jmri.jmrit.operations.trains
jmri.jmrit.operations.trains.schedules
jmri.jmrix	Interfaces and implementations for system-specific code.
jmri.jmrix.acela	This package handles communications for the CTI Acela hardware.
jmri.jmrix.anyma
jmri.jmrix.bidib
jmri.jmrix.can.cbus	Defines classes for interfacing to a MERG CBUS network.
jmri.jmrix.cmri.serial	Provides basic interfaces and certain core implementations for the JMRI C/MRI serial implementation.
jmri.jmrix.dcc4pc
jmri.jmrix.dccpp
jmri.jmrix.debugthrottle
jmri.jmrix.direct
jmri.jmrix.easydcc
jmri.jmrix.ecos	Support for the ESU ECoS.
jmri.jmrix.grapevine	This package handles communications for the ProTrak Grapevine hardware.
jmri.jmrix.ieee802154.xbee
jmri.jmrix.internal	The jmrix.internal package contains a JMRI connection implementation for use without a layout.
jmri.jmrix.ipocs
jmri.jmrix.jmriclient
jmri.jmrix.lenz
jmri.jmrix.lenz.hornbyelite
jmri.jmrix.lenz.li100
jmri.jmrix.loconet	Provides access to LocoNet systems, along with a lot of Swing-based tools.
jmri.jmrix.loconet.hexfile
jmri.jmrix.loconet.locoio
jmri.jmrix.loconet.pr2
jmri.jmrix.loconet.uhlenbrock	Implementation and specialization for connecting to to an Uhlenbrock Intellibox-II via its in-built USB connection.
jmri.jmrix.maple
jmri.jmrix.marklin	Classes to interact with a Marklin Network Connection.
jmri.jmrix.mqtt	Provides JMRI layout objects that use MQTT connections.
jmri.jmrix.mrc
jmri.jmrix.nce
jmri.jmrix.oaktree
jmri.jmrix.openlcb	Implementation of the JMRI OpenLCB hardware interface.
jmri.jmrix.pi
jmri.jmrix.powerline	This package handles communications for powerline adapters, such as X10.
jmri.jmrix.powerline.cm11	This package handles communications for CM11 powerline adapters.
jmri.jmrix.powerline.cp290	This package handles communications for CP290 powerline adapters.
jmri.jmrix.powerline.dmx512	This package handles communications for DMX lighting adapters.
jmri.jmrix.powerline.insteon2412s	This package handles communications for Insteon 2412S adapters.
jmri.jmrix.powerline.simulator
jmri.jmrix.qsi	Connects to a QSI programmer unit.
jmri.jmrix.rfid	This package handles communications for RFID adapters.
jmri.jmrix.rfid.generic.standalone	This package handles communications for Generic RFID stand-alone readers.
jmri.jmrix.rfid.merg.concentrator	This package handles communications for MERG RFID Concentrators.
jmri.jmrix.roco
jmri.jmrix.roco.z21
jmri.jmrix.rps	This package contains software specific to the RPS system from NAC Services, Inc.
jmri.jmrix.secsi	This package handles communications for the TracTronics SECSI hardware.
jmri.jmrix.sprog
jmri.jmrix.srcp	Provide a JMRI connection to an SRCP server.
jmri.jmrix.tams	Support for the ESU ECoS.
jmri.jmrix.tmcc
jmri.jmrix.xpa
jmri.jmrix.zimo
jmri.jmrix.ztc.ztc611
jmri.managers	Provides implementations of various JMRI managers.
jmri.progdebugger	A simple implementation of Programmer for debugging purposes.

Uses of PropertyChangeSupport in jmri

Subclasses of PropertyChangeSupport in jmri

Modifier and Type	Class	Description
class	BlockManager	Basic implementation of a BlockManager.
class	CommonTurnoutOperation	Specialization of TurnoutOperation to contain common properties and methods for concrete subclasses.
class	NamedBeanHandleManager	Instance for controlling the issuing of NamedBeanHandles.
class	NoFeedbackTurnoutOperation	NoFeedBackTurnoutOperation class - specialization of TurnoutOperation to provide automatic retry for a turnout with no feedback.
class	RawTurnoutOperation	RawTurnoutOperation class - specialization of TurnoutOperation to provide automatic retry for a turnout with no feedback by sending raw NMRA commands to the turnout.
class	SensorTurnoutOperation	SensorTurnoutOperation class - specialization of TurnoutOperation to provide automatic retry for a turnout with explicit feedback from sensor(s).
class	TurnoutOperation	Framework for automating reliable turnout operation.

Uses of PropertyChangeSupport in jmri.beans

Subclasses of PropertyChangeSupport in jmri.beans

Modifier and Type	Class	Description
class	VetoableChangeSupport	Implementation of PropertyChangeSupport and VetoableChangeSupport that can be extended by classes that would normally need to implement the methods of PropertyChangeSupport and VetoableChangeSupport independently.

Uses of PropertyChangeSupport in jmri.jmrit.audio

Subclasses of PropertyChangeSupport in jmri.jmrit.audio

Modifier and Type	Class	Description
class	DefaultAudioManager	Provide the concrete implementation for the Internal Audio Manager.

Uses of PropertyChangeSupport in jmri.jmrit.catalog

Subclasses of PropertyChangeSupport in jmri.jmrit.catalog

Modifier and Type	Class	Description
class	DefaultCatalogTreeManager	Provide the concrete implementation for the Internal CatalogTree Manager.

Uses of PropertyChangeSupport in jmri.jmrit.display.layoutEditor

Subclasses of PropertyChangeSupport in jmri.jmrit.display.layoutEditor

Modifier and Type	Class	Description
class	LayoutBlockManager	Implementation of a Manager to handle LayoutBlocks.

Uses of PropertyChangeSupport in jmri.jmrit.entryexit

Subclasses of PropertyChangeSupport in jmri.jmrit.entryexit

Modifier and Type	Class	Description
class	EntryExitPairs	Implements an Entry Exit based method of setting turnouts, setting up signal logic and allocating blocks through a path based on the Layout Editor.

Uses of PropertyChangeSupport in jmri.jmrit.logix

Subclasses of PropertyChangeSupport in jmri.jmrit.logix

Modifier and Type	Class	Description
class	OBlockManager	Basic Implementation of an OBlockManager.
class	WarrantManager	Basic Implementation of a WarrantManager.

Uses of PropertyChangeSupport in jmri.jmrit.logixng.implementation

Subclasses of PropertyChangeSupport in jmri.jmrit.logixng.implementation

Modifier and Type	Class	Description
class	AbstractBaseManager<E extends NamedBean>	Abstract partial implementation for the LogixNG action and expression managers.
class	DefaultAnalogActionManager	Class providing the basic logic of the ActionManager interface.
class	DefaultAnalogExpressionManager	Class providing the basic logic of the ExpressionManager interface.
class	DefaultConditionalNGManager	Class providing the basic logic of the ConditionalNG_Manager interface.
class	DefaultDigitalActionManager	Class providing the basic logic of the DigitalActionManager interface.
class	DefaultDigitalBooleanActionManager	Class providing the basic logic of the DigitalBooleanActionManager interface.
class	DefaultDigitalExpressionManager	Class providing the basic logic of the DigitalExpressionManager interface.
class	DefaultGlobalVariableManager	Class providing the basic logic of the GlobalVariable_Manager interface.
class	DefaultLogixNGManager	Class providing the basic logic of the LogixNG_Manager interface.
class	DefaultModuleManager	Class providing the basic logic of the LogixNG_Manager interface.
class	DefaultNamedTableManager	Class providing the basic logic of the NamedTable_Manager interface.
class	DefaultStringActionManager	Class providing the basic logic of the ActionManager interface.
class	DefaultStringExpressionManager	Class providing the basic logic of the ExpressionManager interface.

Uses of PropertyChangeSupport in jmri.jmrit.operations.automation

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.automation

Modifier and Type	Class	Description
class	Automation	Automation for operations
class	AutomationItem	Represents one automation item of a automation
class	AutomationManager	Manages automations.

Uses of PropertyChangeSupport in jmri.jmrit.operations.automation.actions

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.automation.actions

Modifier and Type	Class	Description
class	Action
class	ActivateTrainScheduleAction
class	ApplyTrainScheduleAction
class	BuildTrainAction
class	BuildTrainIfSelectedAction
class	CounterAction
class	DeselectTrainAction
class	GenerateSwitchListAction
class	GenerateSwitchListChangesAction
class	GotoAction
class	GotoFailureAction
class	GotoSuccessAction
class	HaltAction
class	IsTrainEnRouteAction
class	MessageYesNoAction
class	MoveTrainAction
class	NoAction
class	PrintSwitchListAction
class	PrintSwitchListChangesAction
class	PrintTrainBuildReportAction
class	PrintTrainManifestAction
class	PrintTrainManifestIfSelectedAction
class	ResetSwitchListsAction
class	ResetTrainAction
class	ResumeAutomationAction
class	RunAutomationAction
class	RunSwitchListAction
class	RunSwitchListChangesAction
class	RunTrainAction
class	SelectTrainAction
class	StopAutomationAction
class	TerminateTrainAction
class	UpdateSwitchListAction
class	WaitSwitchListAction
class	WaitTrainAction
class	WaitTrainTerminatedAction

Uses of PropertyChangeSupport in jmri.jmrit.operations.locations

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.locations

Modifier and Type	Class	Description
class	Location	Represents a location on the layout
class	LocationManager	Manages locations.
class	Track	Represents a location (track) on the layout Can be a spur, yard, staging, or interchange track.

Uses of PropertyChangeSupport in jmri.jmrit.operations.locations.divisions

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.locations.divisions

Modifier and Type	Class	Description
class	Division	Represents a railroad division
class	DivisionManager	Manages divisions.

Uses of PropertyChangeSupport in jmri.jmrit.operations.locations.schedules

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.locations.schedules

Modifier and Type	Class	Description
class	Schedule	Represents a car delivery schedule for a location
class	ScheduleItem	Represents one schedule item of a schedule
class	ScheduleManager	Manages schedules.

Uses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock

Modifier and Type	Class	Description
class	RollingStock	Represents rolling stock, both powered (locomotives) and not powered (cars) on the layout.
class	RollingStockAttribute	Represents an attribute a rolling stock can have.
class	RollingStockGroup<T extends RollingStock>	A group of rolling stock that is managed as one unit.
class	RollingStockGroupManager
class	RollingStockManager<T extends RollingStock>	Base class for rolling stock managers car and engine.

Uses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock.cars

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock.cars

Modifier and Type	Class	Description
class	Car	Represents a car on the layout
class	CarColors	Represents the colors that cars can have.
class	CarLengths	Represents the lengths that cars can have.
class	CarLoads	Represents the loads that cars can have.
class	CarManager	Manages the cars.
class	CarOwners	Represents the owner names that cars can have.
class	CarRoads	Represents the road names that cars can have.
class	CarTypes	Represents the types of cars a railroad can have.
class	Kernel	A Kernel is a group of cars that is managed as one car.
class	KernelManager	Manages Kernels.

Uses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock.engines

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.rollingstock.engines

Modifier and Type	Class	Description
class	Consist	A consist is a group of engines that is managed as one engine.
class	ConsistManager	Manages Consists.
class	Engine	Represents a locomotive on the layout
class	EngineLengths	Represents the lengths that engines can have.
class	EngineManager	Manages the engines.
class	EngineModels	Represents the various engine models a railroad can have.
class	EngineTypes	Represents the types of engines a railroad can have.

Uses of PropertyChangeSupport in jmri.jmrit.operations.routes

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.routes

Modifier and Type	Class	Description
class	Route	Represents a route on the layout
class	RouteLocation	Represents a location in a route, a location can appear more than once in a route.
class	RouteManager	Manages the routes

Uses of PropertyChangeSupport in jmri.jmrit.operations.setup

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.setup

Modifier and Type	Class	Description
class	Setup	Operations settings.

Uses of PropertyChangeSupport in jmri.jmrit.operations.setup.backup

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.setup.backup

Modifier and Type	Class	Description
class	AutoBackup	Specific Backup class for backing up and restoring Operations working files to the Automatic Backup Store.
class	BackupBase	Base class for backing up and restoring Operations working files.
class	DefaultBackup	Specific Backup class for backing up and restoring Operations working files to the Default Backup Store.

Uses of PropertyChangeSupport in jmri.jmrit.operations.trains

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.trains

Modifier and Type	Class	Description
class	Train	Represents a train on the layout
class	TrainManager	Manages trains.

Uses of PropertyChangeSupport in jmri.jmrit.operations.trains.schedules

Subclasses of PropertyChangeSupport in jmri.jmrit.operations.trains.schedules

Modifier and Type	Class	Description
class	TrainSchedule	Represents a schedule for trains.
class	TrainScheduleManager	Manages train schedules.

Uses of PropertyChangeSupport in jmri.jmrix

Subclasses of PropertyChangeSupport in jmri.jmrix

Modifier and Type	Class	Description
class	AbstractProgrammer	Common implementations for the Programmer interface.
class	AbstractThrottle	An abstract implementation of DccThrottle.

Uses of PropertyChangeSupport in jmri.jmrix.acela

Subclasses of PropertyChangeSupport in jmri.jmrix.acela

Modifier and Type	Class	Description
class	AcelaLightManager	Implement LightManager for Acela systems.
class	AcelaSensorManager	Manage the Acela-specific Sensor implementation.
class	AcelaTurnoutManager	Implement turnout manager for Acela systems.

Uses of PropertyChangeSupport in jmri.jmrix.anyma

Subclasses of PropertyChangeSupport in jmri.jmrix.anyma

Modifier and Type	Class	Description
class	UsbLightManager	Implement LightManager for Anyma dmx usb systems.

Uses of PropertyChangeSupport in jmri.jmrix.bidib

Subclasses of PropertyChangeSupport in jmri.jmrix.bidib

Modifier and Type	Class	Description
class	BiDiBLightManager	Implement LightManager for BiDiB systems.
class	BiDiBOpsModeProgrammer	Provides an Ops mode programming interface for BiDiB Currently only Byte mode is implemented, though BiDiB also supports bit mode writes for POM
class	BiDiBProgrammer	Convert the jmri.Programmer interface into BiDiB.
class	BiDiBProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for BiDiB systems
class	BiDiBReporterManager	BiDiBReporterManager implements the ReporterManager for BiDiB
class	BiDiBSensorManager	Implement SensorManager for BiDiB systems.
class	BiDiBThrottle	An implementation of DccThrottle with code specific to an BiDiB connection.
class	BiDiBTurnoutManager	Implement turnout manager for BiDiB systems.

Uses of PropertyChangeSupport in jmri.jmrix.can.cbus

Subclasses of PropertyChangeSupport in jmri.jmrix.can.cbus

Modifier and Type	Class	Description
class	CbusDccOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the CBUS command station object.
class	CbusDccProgrammer	Implements the jmri.Programmer interface via commands for the CBUS programmer.
class	CbusDccProgrammerManager	Extend DefaultProgrammerManager to provide programmers for CBUS systems Added methods to manipulate the programmer availability to support hardware that can redirect ops mode or service mode packets to a particular interface.
class	CbusLightManager	Implement LightManager for CAN CBUS systems.
class	CbusPowerManager	PowerManager implementation for controlling CBUS layout power.
class	CbusReporterManager	Implement ReporterManager for CAN CBUS systems.
class	CbusSensorManager	Implement SensorManager for CAN CBUS systems.
class	CbusThrottle	An implementation of DccThrottle via AbstractThrottle with code specific to a CBUS connection.
class	CbusTurnoutManager	Implement TurnoutManager for CAN CBUS systems.

Uses of PropertyChangeSupport in jmri.jmrix.cmri.serial

Subclasses of PropertyChangeSupport in jmri.jmrix.cmri.serial

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for CMRI serial systems.
class	SerialSensorManager	Manage the C/MRI serial-specific Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for CMRI serial systems.

Uses of PropertyChangeSupport in jmri.jmrix.dcc4pc

Subclasses of PropertyChangeSupport in jmri.jmrix.dcc4pc

Modifier and Type	Class	Description
class	Dcc4PcOpsModeProgrammer	Provides an Ops mode proxy programming interface for a RailCom Reader.
class	Dcc4PcProgrammerManager	DCC4PC Programmer acts as a proxy for ops mode programming.
class	Dcc4PcReporterManager	Dcc4PcReporterManager implements the ReporterManage for dcc4pc
class	Dcc4PcSensorManager	Implement SensorManager for Dcc4Pc systems.

Uses of PropertyChangeSupport in jmri.jmrix.dccpp

Subclasses of PropertyChangeSupport in jmri.jmrix.dccpp

Modifier and Type	Class	Description
class	DCCppLightManager	Implement LightManager for DCC++ systems.
class	DCCppOpsModeProgrammer	Provides an Ops mode programming interface for DCC++.
class	DCCppPowerManager
class	DCCppProgrammer	Programmer support for DCC++.
class	DCCppProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers on DCC++
class	DCCppSensorManager	Implement SensorManager for DCC++ systems.
class	DCCppThrottle	An implementation of DccThrottle with code specific to a DCC++ connection.
class	DCCppTurnoutManager	Implement TurnoutManager for DCC++ systems.

Uses of PropertyChangeSupport in jmri.jmrix.debugthrottle

Subclasses of PropertyChangeSupport in jmri.jmrix.debugthrottle

Modifier and Type	Class	Description
class	DebugThrottle	An implementation of DccThrottle for debugging use.

Uses of PropertyChangeSupport in jmri.jmrix.direct

Subclasses of PropertyChangeSupport in jmri.jmrix.direct

Modifier and Type	Class	Description
class	Throttle	An implementation of DccThrottle with code specific to a Direct serial connection.

Uses of PropertyChangeSupport in jmri.jmrix.easydcc

Subclasses of PropertyChangeSupport in jmri.jmrix.easydcc

Modifier and Type	Class	Description
class	EasyDccOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper that works with the EasyDccCommandStation object.
class	EasyDccPowerManager	PowerManager implementation for controlling layout power
class	EasyDccProgrammer	Implements the jmri.Programmer interface via commands for the EasyDCC powerstation.
class	EasyDccProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for EasyDCC systems.
class	EasyDccThrottle	An implementation of DccThrottle with code specific to an EasyDCC connection.
class	EasyDccTurnoutManager	Implement turnout manager for EasyDcc systems.

Uses of PropertyChangeSupport in jmri.jmrix.ecos

Subclasses of PropertyChangeSupport in jmri.jmrix.ecos

Modifier and Type	Class	Description
class	EcosDccThrottle	An implementation of DccThrottle with code specific to an ECoS connection.
class	EcosLocoAddressManager	Class to manage the ECoS Loco entries within JMRI.
class	EcosOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the ECoS command station object.
class	EcosPowerManager	PowerManager implementation for controlling ECoS layout power.
class	EcosProgrammer	Implements the jmri.Programmer interface via commands for the ECoS programmer.
class	EcosProgrammerManager	Extend DefaultProgrammerManager to provide programmers on ECos Programming track is supported from ECoS firmware version 4.1.
class	EcosReporterManager	EcosReporterManager implements the ReporterManager for ECoS
class	EcosSensorManager	Implement sensor manager for ECoS systems.
class	EcosTurnoutManager	Implement turnout manager for Ecos systems.

Uses of PropertyChangeSupport in jmri.jmrix.grapevine

Subclasses of PropertyChangeSupport in jmri.jmrix.grapevine

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for Grapevine serial systems.
class	SerialSensorManager	Manage the system-specific Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for Grapevine systems.

Uses of PropertyChangeSupport in jmri.jmrix.ieee802154.xbee

Subclasses of PropertyChangeSupport in jmri.jmrix.ieee802154.xbee

Modifier and Type	Class	Description
class	XBeeLightManager	Implement LightManager for XBee connections.
class	XBeeSensorManager	Manage the XBee specific Sensor implementation.
class	XBeeTurnoutManager	Implement turnout manager for XBee connections

Uses of PropertyChangeSupport in jmri.jmrix.internal

Subclasses of PropertyChangeSupport in jmri.jmrix.internal

Modifier and Type	Class	Description
class	InternalAnalogIOManager	Implement a AnalogIOManager for "Internal" (virtual) AnalogIOs.
class	InternalLightManager	Implement a LightManager for "Internal" (virtual) lights.
class	InternalMeterManager	Implement a MeterManager for "Internal" (virtual) Meters.
class	InternalReporterManager	Implementation of the InternalReporterManager interface.
class	InternalSensorManager	Implementation of the InternalSensorManager interface.
class	InternalStringIOManager	Implement a StringIOManager for "Internal" (virtual) StringIOs.
class	InternalTurnoutManager	Implement a turnout manager for "Internal" (virtual) turnouts.

Uses of PropertyChangeSupport in jmri.jmrix.ipocs

Subclasses of PropertyChangeSupport in jmri.jmrix.ipocs

Modifier and Type	Class	Description
class	IpocsLightManager
class	IpocsSensorManager
class	IpocsTurnoutManager

Uses of PropertyChangeSupport in jmri.jmrix.jmriclient

Subclasses of PropertyChangeSupport in jmri.jmrix.jmriclient

Modifier and Type	Class	Description
class	JMRIClientLightManager	Implement LightManager for JMRIClient systems
class	JMRIClientPowerManager	PowerManager implementation for controlling layout power
class	JMRIClientReporterManager	Implement reporter manager for JMRIClient systems
class	JMRIClientSensorManager	Implement sensor manager for JMRIClient systems.
class	JMRIClientTurnoutManager	Implement turnout manager for JMRIClient systems

Uses of PropertyChangeSupport in jmri.jmrix.lenz

Subclasses of PropertyChangeSupport in jmri.jmrix.lenz

Modifier and Type	Class	Description
class	XNetLightManager	Implement LightManager for XpressNet systems.
class	XNetOpsModeProgrammer	Provides an Ops mode programming interface for XpressNet Currently only Byte mode is implemented, though XpressNet also supports bit mode writes for POM
class	XNetPowerManager	PowerManager implementation for controlling layout power.
class	XNetProgrammer	Convert the jmri.Programmer interface into commands for the Lenz XpressNet
class	XNetProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers on XPressNet
class	XNetSensorManager	Manage the XpressNet specific Sensor implementation.
class	XNetThrottle	An implementation of DccThrottle with code specific to an XpressNet connection.
class	XNetTurnoutManager	Implement turnout manager for Lenz (XpresssNet) connections.

Uses of PropertyChangeSupport in jmri.jmrix.lenz.hornbyelite

Subclasses of PropertyChangeSupport in jmri.jmrix.lenz.hornbyelite

Modifier and Type	Class	Description
class	EliteXNetProgrammer	Programmer support for Hornby Elite implementationn of XpressNet.
class	EliteXNetThrottle	An implementation of DccThrottle with code specific to an XpressNet connection on the Hornby Elite.
class	EliteXNetTurnoutManager	Implement XNet turnout manager - Specific to Hornby Elite

Uses of PropertyChangeSupport in jmri.jmrix.lenz.li100

Subclasses of PropertyChangeSupport in jmri.jmrix.lenz.li100

Modifier and Type	Class	Description
class	LI100XNetProgrammer	Programmer support for Lenz XpressNet.

Uses of PropertyChangeSupport in jmri.jmrix.loconet

Subclasses of PropertyChangeSupport in jmri.jmrix.loconet

Modifier and Type	Class	Description
class	Ib1Throttle	A specialization of the LocoNet Throttle for Intellibox-I foibles.
class	Ib2Throttle	A specialization of the LocoNet Throttle for Intellibox-II foibles.
class	LncvDevicesManager	LocoNet LNCV Devices Manager
class	LnLightManager	Implement LightManager for LocoNet systems.
class	LnOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper that works with the LocoNet SlotManager object.
class	LnPowerManager	PowerManager implementation for controlling layout power.
class	LnProgrammerManager	Extend DefaultProgrammerManager to provide programmers on LocoNet.
class	LnReporterManager	Manage the LocoNet-specific Reporter implementation.
class	LnSensorManager	Manage the LocoNet-specific Sensor implementation.
class	LnStringIOManager	Manage the LocoNet-specific Sensor implementation.
class	Lnsv1DevicesManager	LocoNet LNSV1 Devices Manager
class	LnTurnoutManager	Manage the LocoNet-specific Turnout implementation.
class	LocoNetThrottle	An implementation of DccThrottle via AbstractThrottle with code specific to a LocoNet connection.
class	Pr2Throttle	An implementation of DccThrottle via AbstractThrottle with code specific to a PR2 connection.
class	SlotManager	Controls a collection of slots, acting as the counter-part of a LocoNet command station.
class	TranspondingTagManager	Concrete implementation for the Internal IdTagManager interface that manages TranspondingTags.
class	UhlenbrockSlotManager	Only change compared to standard LocoNet SlotManager is CV programming.

Uses of PropertyChangeSupport in jmri.jmrix.loconet.hexfile

Subclasses of PropertyChangeSupport in jmri.jmrix.loconet.hexfile

Modifier and Type	Class	Description
class	LnSensorManager	Manage the LocoNet-specific Sensor implementation via a LocoNet hexfile emulator.

Uses of PropertyChangeSupport in jmri.jmrix.loconet.locoio

Subclasses of PropertyChangeSupport in jmri.jmrix.loconet.locoio

Modifier and Type	Class	Description
class	LocoIOData	Data associated with a LocoIO device.

Uses of PropertyChangeSupport in jmri.jmrix.loconet.pr2

Subclasses of PropertyChangeSupport in jmri.jmrix.loconet.pr2

Modifier and Type	Class	Description
class	LnPr2PowerManager	PowerManager implementation for controlling layout power via PR2.

Uses of PropertyChangeSupport in jmri.jmrix.loconet.uhlenbrock

Subclasses of PropertyChangeSupport in jmri.jmrix.loconet.uhlenbrock

Modifier and Type	Class	Description
class	UhlenbrockProgrammerManager	Extend LnProgrammerManager to disable on-the-track programming, which is not supported by IB-COM or Intellibox II

Uses of PropertyChangeSupport in jmri.jmrix.maple

Subclasses of PropertyChangeSupport in jmri.jmrix.maple

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for Maple serial systems.
class	SerialSensorManager	Manage the specific Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for serial systems

Uses of PropertyChangeSupport in jmri.jmrix.marklin

Subclasses of PropertyChangeSupport in jmri.jmrix.marklin

Modifier and Type	Class	Description
class	MarklinPowerManager	PowerManager implementation for controlling layout power.
class	MarklinSensorManager	Implement sensor manager for Marklin systems.
class	MarklinThrottle	An implementation of DccThrottle with code specific to an TAMS connection.
class	MarklinTurnoutManager	Implement turnout manager for Marklin systems.

Uses of PropertyChangeSupport in jmri.jmrix.mqtt

Subclasses of PropertyChangeSupport in jmri.jmrix.mqtt

Modifier and Type	Class	Description
class	MqttLightManager	Implement LightManager for MQTT systems
class	MqttPowerManager
class	MqttReporterManager	Provide a ReporterManager implementation for MQTT communications
class	MqttSensorManager	Implementation of the MqttSensorManager interface.
class	MqttThrottle	An implementation of AbstractThrottle with code specific to a MQTT connection.
class	MqttTurnoutManager	Implement turnout manager for MQTT systems

Uses of PropertyChangeSupport in jmri.jmrix.mrc

Subclasses of PropertyChangeSupport in jmri.jmrix.mrc

Modifier and Type	Class	Description
class	MrcOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the MRC command station object.
class	MrcPowerManager	PowerManager implementation for controlling layout power
class	MrcProgrammer	Convert the jmri.Programmer interface into commands for the MRC power house.
class	MrcProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for MRC systems
class	MrcThrottle	An implementation of DccThrottle with code specific to an MRC connection.
class	MrcTurnoutManager	New MRC TurnoutManager

Uses of PropertyChangeSupport in jmri.jmrix.nce

Subclasses of PropertyChangeSupport in jmri.jmrix.nce

Modifier and Type	Class	Description
class	NceLightManager	Implement LightManager for NCE systems
class	NceOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the NCE command station object.
class	NcePowerManager	PowerManager implementation for controlling layout power.
class	NceProgrammer	Convert the jmri.Programmer interface into commands for the NCE power house.
class	NceProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for NCE systems.
class	NceSensorManager	Manage the NCE-specific Sensor implementation.
class	NceThrottle	An implementation of DccThrottle with code specific to an NCE connection.
class	NceTurnoutManager	Implement turnout manager for NCE systems.

Uses of PropertyChangeSupport in jmri.jmrix.oaktree

Subclasses of PropertyChangeSupport in jmri.jmrix.oaktree

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for Oak Tree serial systems.
class	SerialSensorManager	Manage the system-specific Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for Oak Tree systems.

Uses of PropertyChangeSupport in jmri.jmrix.openlcb

Subclasses of PropertyChangeSupport in jmri.jmrix.openlcb

Modifier and Type	Class	Description
class	OlcbLightManager
class	OlcbMeterManager	Central functions for OlcbMeters.
class	OlcbPowerManager	Extend jmri.managers.AbstractPowerManager for OpenLCB controls.
class	OlcbProgrammer	Provide access to the hardware DCC decoder programming capability.
class	OlcbProgrammerManager	Get access to available Programmer objects.
class	OlcbReporterManager	Manage the OpenLCB-specific Reporter implementation.
class	OlcbSensorManager	Manage the OpenLCB-specific Sensor implementation.
class	OlcbStringIOManager	Implement a StringIOManager for OpenLCB StringIOs.
class	OlcbThrottle	An implementation of DccThrottle for OpenLCB.
class	OlcbTurnoutManager	OpenLCB implementation of a TurnoutManager.

Uses of PropertyChangeSupport in jmri.jmrix.pi

Subclasses of PropertyChangeSupport in jmri.jmrix.pi

Modifier and Type	Class	Description
class	RaspberryPiSensorManager	Manage the RaspberryPi specific Sensor implementation.
class	RaspberryPiTurnoutManager	Implement Pi turnout manager.

Uses of PropertyChangeSupport in jmri.jmrix.powerline

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for Powerline serial systems.
class	SerialSensorManager	Manage the system-specific Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for Powerline systems.

Uses of PropertyChangeSupport in jmri.jmrix.powerline.cm11

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline.cm11

Modifier and Type	Class	Description
class	SpecificLightManager	Implement LightManager for powerline serial systems with CM11 adapters.
class	SpecificSensorManager	Manage the system-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.powerline.cp290

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline.cp290

Modifier and Type	Class	Description
class	SpecificLightManager	Implement LightManager for powerline serial systems with CP290 adapters
class	SpecificSensorManager	Manage the system-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.powerline.dmx512

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline.dmx512

Modifier and Type	Class	Description
class	SpecificLightManager	Implement LightManager for powerline serial systems with DMX512 serial adapters.

Uses of PropertyChangeSupport in jmri.jmrix.powerline.insteon2412s

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline.insteon2412s

Modifier and Type	Class	Description
class	SpecificLightManager	Implement LightManager for powerline serial systems with Insteon 2412S adapters
class	SpecificSensorManager	Manage the system-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.powerline.simulator

Subclasses of PropertyChangeSupport in jmri.jmrix.powerline.simulator

Modifier and Type	Class	Description
class	SpecificLightManager	Implement LightManager for powerline serial systems with Insteon 2412S adapters
class	SpecificSensorManager	Manage the system-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.qsi

Subclasses of PropertyChangeSupport in jmri.jmrix.qsi

Modifier and Type	Class	Description
class	QsiProgrammer	Implements the jmri.Programmer interface via commands for the QSI programmer.

Uses of PropertyChangeSupport in jmri.jmrix.rfid

Subclasses of PropertyChangeSupport in jmri.jmrix.rfid

Modifier and Type	Class	Description
class	RfidReporterManager	Rfid implementation of a ReporterManager.
class	RfidSensorManager	Manage the Rfid-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.rfid.generic.standalone

Subclasses of PropertyChangeSupport in jmri.jmrix.rfid.generic.standalone

Modifier and Type	Class	Description
class	StandaloneReporterManager	Rfid implementation of a ReporterManager.
class	StandaloneSensorManager	Manage the Rfid-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.rfid.merg.concentrator

Subclasses of PropertyChangeSupport in jmri.jmrix.rfid.merg.concentrator

Modifier and Type	Class	Description
class	ConcentratorReporterManager	Rfid implementation of a ReporterManager.
class	ConcentratorSensorManager	Manage the Rfid-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.roco

Subclasses of PropertyChangeSupport in jmri.jmrix.roco

Modifier and Type	Class	Description
class	RocoXNetThrottle	An implementation of DccThrottle with code specific to a Roco XpressNet connection.

Uses of PropertyChangeSupport in jmri.jmrix.roco.z21

Subclasses of PropertyChangeSupport in jmri.jmrix.roco.z21

Modifier and Type	Class	Description
class	Z21ReporterManager	Z21ReporterManager implements the Reporter Manager interface for Roco Z21 systems.
class	Z21SensorManager	Manage the Z21Specific Sensor implementation.
class	Z21XNetOpsModeProgrammer	Provides an Ops mode programming interface for Roco Z21 Currently only Byte mode is implemented, though XpressNet also supports bit mode writes for POM
class	Z21XNetProgrammer	Z21 Programmer support for Lenz XpressNet.
class	Z21XNetProgrammerManager	Extend XNetProgrammerManager for Z21.
class	Z21XNetThrottle	An implementation of DccThrottle with code specific to a z21 XpressNet connection.
class	Z21XNetTurnoutManager	Implement z21 turnout manager.

Uses of PropertyChangeSupport in jmri.jmrix.rps

Subclasses of PropertyChangeSupport in jmri.jmrix.rps

Modifier and Type	Class	Description
class	RpsReporterManager	RPS implementation of a ReporterManager.
class	RpsSensorManager	Manage the RPS-specific Sensor implementation.

Uses of PropertyChangeSupport in jmri.jmrix.secsi

Subclasses of PropertyChangeSupport in jmri.jmrix.secsi

Modifier and Type	Class	Description
class	SerialLightManager	Implement LightManager for SECSI serial systems.
class	SerialSensorManager	Manage the system-specific SECSI Sensor implementation.
class	SerialTurnoutManager	Implement turnout manager for SECSI systems.

Uses of PropertyChangeSupport in jmri.jmrix.sprog

Subclasses of PropertyChangeSupport in jmri.jmrix.sprog

Modifier and Type	Class	Description
class	SprogCSThrottle	An implementation of DccThrottle with code specific to a SPROG Command Station connection.
class	SprogOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the SPROG command station object.
class	SprogPowerManager	PowerManager implementation for controlling SPROG layout power.
class	SprogProgrammer	Implement the jmri.Programmer interface via commands for the Sprog programmer.
class	SprogProgrammerManager	Extend DefaultProgrammerManager to provide programmers for SPROG systems.
class	SprogThrottle	An implementation of DccThrottle with code specific to an SPROG connection.
class	SprogTurnoutManager	Implement turnout manager for Sprog systems.

Uses of PropertyChangeSupport in jmri.jmrix.srcp

Subclasses of PropertyChangeSupport in jmri.jmrix.srcp

Modifier and Type	Class	Description
class	SRCPPowerManager	PowerManager implementation for controlling layout power
class	SRCPProgrammer	Implements the jmri.Programmer interface via commands for the SRCP powerstation
class	SRCPProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for SRCP systems
class	SRCPSensorManager	Implement SensorMmanager for SRCP systems.
class	SRCPThrottle	An implementation of DccThrottle with code specific to an SRCP connection.
class	SRCPTurnoutManager	Implement TurnoutManager for SRCP systems.

Uses of PropertyChangeSupport in jmri.jmrix.tams

Subclasses of PropertyChangeSupport in jmri.jmrix.tams

Modifier and Type	Class	Description
class	TamsOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper what works with the TAMS command station object.
class	TamsPowerManager	PowerManager implementation for controlling layout power using binary P50x commands Based on work by Bob Jacobsen and Kevin Dickerson
class	TamsProgrammer	Convert the jmri.Programmer interface into commands for the NCE power house.
class	TamsProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for NCE systems
class	TamsSensorManager	Implement sensor manager for Tams systems.
class	TamsThrottle	An implementation of DccThrottle with code specific to a TAMS connection.
class	TamsTurnoutManager	Implement turnout manager for Tams systems.

Uses of PropertyChangeSupport in jmri.jmrix.tmcc

Subclasses of PropertyChangeSupport in jmri.jmrix.tmcc

Modifier and Type	Class	Description
class	SerialThrottle	An implementation of DccThrottle.
class	SerialTurnoutManager	Implement turnout manager for TMCC serial systems.
class	TmccOpsModeProgrammer	Provide an Ops Mode Programmer via a wrapper that works with the TMCC control interface
class	TmccProgrammer	Implements the jmri.Programmer interface via commands for the TMCC control interface.
class	TmccProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for TMCC systems.

Uses of PropertyChangeSupport in jmri.jmrix.xpa

Subclasses of PropertyChangeSupport in jmri.jmrix.xpa

Modifier and Type	Class	Description
class	XpaPowerManager	PowerManager implementation for controlling layout power from an XPA+modem connected to an XpressNet based system.
class	XpaThrottle	An XPA+Modem implementation of the Throttle for XpressNet Systems
class	XpaTurnoutManager	Implement turnout manager for Xpa+Modem connections to XpressNet Based systems.

Uses of PropertyChangeSupport in jmri.jmrix.zimo

Subclasses of PropertyChangeSupport in jmri.jmrix.zimo

Modifier and Type	Class	Description
class	Mx1OpsModeProgrammer	Programmer support for Zimo MXULF operations mode.
class	Mx1PowerManager	PowerManager implementation for controlling layout power.
class	Mx1Programmer	Programmer support for Zimo Mx-1.
class	Mx1ProgrammerManager	Extend DefaultProgrammerManager to provide ops mode programmers for Zimo systems.
class	Mx1Throttle	An implementation of DccThrottle with code specific to an Mx1 connection.
class	Mx1TurnoutManager	Implement turnout manager for Mx1 Turnouts.

Uses of PropertyChangeSupport in jmri.jmrix.ztc.ztc611

Subclasses of PropertyChangeSupport in jmri.jmrix.ztc.ztc611

Modifier and Type	Class	Description
class	ZTC611XNetTurnoutManager	Implement turnout manager - Specific to ZTC ZTC611

Uses of PropertyChangeSupport in jmri.managers

Subclasses of PropertyChangeSupport in jmri.managers

Modifier and Type	Class	Description
class	AbstractAnalogIOManager	Abstract partial implementation of a AnalogIOManager.
class	AbstractAudioManager	Abstract partial implementation of an AudioManager.
class	AbstractLightManager	Abstract partial implementation of a LightManager.
class	AbstractManager<E extends NamedBean>	Abstract partial implementation for all Manager-type classes.
class	AbstractMemoryManager	Abstract partial implementation of a MemoryManager.
class	AbstractMeterManager	Default implementation of a MeterManager.
class	AbstractPowerManager<M extends SystemConnectionMemo>	Base PowerManager implementation for controlling layout power.
class	AbstractProvidingProxyManager<E extends NamedBean>	Implementation of a Manager that can serves as a proxy for multiple system-specific implementations.
class	AbstractProxyManager<E extends NamedBean>	Implementation of a Manager that can serves as a proxy for multiple system-specific implementations.
class	AbstractReporterManager	Abstract partial implementation of a ReporterManager.
class	AbstractSensorManager	Abstract base implementation of the SensorManager interface.
class	AbstractSignalHeadManager	Abstract partial implementation of a SignalHeadManager.
class	AbstractStringIOManager	Abstract partial implementation of a StringIOManager.
class	AbstractTurnoutManager	Abstract partial implementation of a TurnoutManager.
class	DefaultConditionalManager	Basic Implementation of a ConditionalManager.
class	DefaultIdTagManager	Concrete implementation for the Internal IdTagManager interface.
class	DefaultLogixManager	Basic Implementation of a LogixManager.
class	DefaultMemoryManager	Provide the concrete implementation for the Internal Memory Manager.
class	DefaultPowerManager	Default implementation for controlling layout power
class	DefaultProgrammerManager	Provides a very basic implementation of a programmer manager by providing a union of the AddressedProgrammerManager and GlobalProgrammerManager interfaces.
class	DefaultRailComManager	Concrete implementation for the Internal RailComManager interface.
class	DefaultRouteManager	Basic Implementation of a RouteManager.
class	DefaultSectionManager	Basic Implementation of a SectionManager.
class	DefaultSignalGroupManager	Default implementation of a SignalGroupManager.
class	DefaultSignalMastLogicManager	Default implementation of a SignalMastLogicManager.
class	DefaultSignalMastManager	Default implementation of a SignalMastManager.
class	DefaultSignalSystemManager	Default implementation of a SignalSystemManager.
class	DefaultTransitManager	Implementation of a Transit Manager
class	DefaultVariableLightManager	Default implementation of a VariableLightManager.
class	DeferringProgrammerManager	Defers global programmer operations to the default global Programmer, and addressed programmer operations to the default AddressedProgrammer.
class	ProxyAnalogIOManager	Implementation of a AnalogIOManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyIdTagManager	Implementation of a IdTagManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyLightManager	Implementation of a LightManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyMeterManager	Implementation of a MeterManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyReporterManager	Implementation of a ReporterManager that can serve as a proxy for multiple system-specific implementations.
class	ProxySensorManager	Implementation of a SensorManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyStringIOManager	Implementation of a StringIOManager that can serve as a proxy for multiple system-specific implementations.
class	ProxyTurnoutManager	Implementation of a TurnoutManager that can serve as a proxy for multiple system-specific implementations.

Uses of PropertyChangeSupport in jmri.progdebugger

Subclasses of PropertyChangeSupport in jmri.progdebugger

Modifier and Type	Class	Description
class	DebugProgrammerManager	Provides an implementation of ProgrammerManager for the debug programmer.
class	ProgDebugger	Debugging implementation of Programmer interface.