Release Notes for JMRI 4.11.1 release
Date: December 24, 2017
From: Bob Jacobsen
Subject: Test Release 4.11.1 of JMRI/DecoderPro is available for download.
This is a test release. Please post a note if you encounter any new or old bugs! And please back up your JMRI files before installing this, in case you want to go back to an earlier version.
This is the first in a series of test releases. We expect this series to end in the next JMRI production release around the middle of 2018. (See the tentative release schedule)
Some of the changes involved are quite extensive. They may require a certain amount of experience before they are working well. Therefore, this test release should be considered experimental.
Required Migration StepSince JMRI 4.7.4JMRI was updated in JMRI 4.7.4 to use a new serial library. Depending on your exact circumstances, you may need to do some migrations:
- If you are using JMRI on Linux or Mac OS X and are updating from an older JMRI version,
you must open the JMRI preferences and make sure that the selections are
correct for your serial device(s). Be sure to save the changes.
In general, previous versions used serial device names like "/dev/cu.usbserial-ABC123FG". This version will generally omit the prefix, and use serial device names like "cu.usbserial-ABC123FG". (If given the choice if a name starting with "tty" and one starting with "cu", pick the "cu" one). See the before and after images to the right.
- If you are using Linux and have previously used the "JMRI_SERIAL_PORTS" option to make sure your serial device is visible to JMRI, you'll have to change that to use the "purejavacomm.portnamepattern" option instead. See the JMRI Linux install page for more information.
If you have your own JMRI scripts to access a serial device, you'll have to update
their library references:
import gnu.iostatements will have to be replaced by
- More generally, any reference to
gnu.io, e.g. a reference to a class like
gnu.io.SerialPort, statements will have to be replaced by a reference to the corresponding
Known problems with this release
New warnings for this release:
Older warningsSee the JMRI 4.10 release note for more warnings predating the 4.11 development series. These may be relevant to you if you're updating from an earlier version.
Since JMRI 4.9.4 Due to changes in the capitalization of some method and property names, some scripts may fail until adjusted to use the new capitalization. The Javadocs for any JMRI class will list the correct capitalization.
Since JMRI 4.9.4 For Windows users only: JMRI 4.9.3 (and all later) has a new version of the "LaunchJMRI.exe" program. It's used to set options as JMRI is starting up, and is a completely normal part of JMRI. Because it's new and different, however, your anti-virus program may reject it. You might get a message about "file removed" or "file quarantined" or similar and then JMRI might not start. The solution is to make sure that your anti-virus program doesn't interfere with JMRI's installation and running. There are so many of those, unfortunately, that we can't really provide useful instructions beyond that.
Since JMRI 4.9.2 JMRI saves the Uhlenbrock connection's "baud" rate as an Internationalized string, and, upon loading a configuration profile, requires an Internationalized "baud" rate in the .XML file. JMRI will fail to properly configure the serial port if the "baud" rate from the configuration profile does not match one of the baud rate strings for the current Internationalization "locale". If you experience problems where JMRI start-up of a Uhlenbrock-based connection does not configure the serial port, it may be necessary to edit the connection's preferences, select the appropriate "baud" rate, save the connection. This updates the configuration profile XML file to use one of the "baud" rate strings expected by the Uhlenbrock-specific code in JMRI. It is necessary to re-start JMRI for this change to take effect.
Since JMRI 4.7.6 If you're having trouble getting your DCC programmer to work, try checking that the "Defaults" under "Preferences" are set to your hardware system. The reason: This version of JMRI (and all later) provides more options for "default systems": If you have multiple sets of hardware attached, which should be used for throttles, for programming, etc. JMRI tries to guess the right settings for these when you upgrade to this version, but apparently it sometimes gets that wrong (we haven't been able to track that down yet). Setting them manually fixes any wrong guesses.
Since JMRI 4.7.3 This release will not start cleanly if installed over earlier versions of JMRI (the Windows installer ensures this is not an issue). Remove the JAR files jackson-annotations-2.0.6.jar, jackson-core-2.0.6.jar, and jackson-databind-2.0.6.jar from the lib directory within the previous installation directory to resolve this.
Since JMRI 4.7.1
JMRI no longer supports the portable paths
were deprecated in JMRI 2.13. When loading a panel, an error message will be displayed
if the panel contains a path that starts with
resource: and the panel will
not load until changed using an external editor. Paths starting with
cannot be automatically flagged because JMRI allows file: URLs; these will have to
be changed manually.
Since JMRI 4.7.1 JMRI applications will not load a panel file that fails XML validation; an error will be shown that should explains the error, allowing it to be fixed using an editor. (The explanations remain a work in progress.) If you have a problem loading a panel file, please
- Configure your JMRI startup to first run the jython/TurnOffXmlValidation.py script which will suppress the error.
- Write out a new version of the panel file (after saving a backup!)
- Use that new version from now on.
- And drop use of the jython/TurnOffXmlValidation.py script.
Since JMRI 4.5.2 This and future releases of JMRI may not function on OS X if the Java SE 6 provided by Apple is installed. OS X operating system updates routinely remove this version of Java SE 6. Please raise any issues concerning this on the user's group. To remove Java SE 6 from OS X, follow these steps (these steps assume JMRI is installed in the folder /Applications/JMRI, if not, adjust the following paths as needed):
- Open Terminal.app.
El Capitan only: Reboot into Recovery Mode by restarting your Mac and pressing Cmd-R until the Apple logo appears. Once in Recovery Mode, select Terminal from the Utilities menu.
- Run the command
/Applications/JMRI/PanelPro.app/Contents/Resources/uninstall-java6.shIt can take up to a half hour to complete. Wait for the message Removed Apple Java SE6.
El Capitan only: Run the command
bash /Volumes/Macintosh\ HD/Applications/JMRI/PanelPro.app/Contents/Resources/uninstall-java6.sh /Volumes/Macintosh\ HDIt can take up to a half hour to complete. Wait for the message Removed Apple Java SE6.
- El Capitan only: Restart your Mac.
Since JMRI 4.5.2 Support for directly executing AppleScript within JMRI has been removed due to changes in macOS and Java outside our control. If you require the ability to use AppleScript, you may be able to add this capability on your own by visiting JMRI AppleScript Support, but please be aware that this may not work on upcoming releases of macOS or Java.
Since JMRI 4.5.1 Internal turnouts and sensors need to have complete, individual system names. The names "IT" and "IS" (without any suffix) are no longer permitted: "IT12" is fine, but just "IT" is not. Most panel files that contain these should automatically migrate them to new names when saved, but in some cases you might need to manually update them.
Download links:Please note that the download links in this and future JMRI releases link to Github servers. If that doesn't work for you, the files are also still available from the SourceForge.net servers. Please let us know of any problems.
- OS X / macOS: https://github.com/JMRI/JMRI/releases/download/v4.11.1/JMRI.4.11.1.Rfe44680.dmg
- Windows: https://github.com/JMRI/JMRI/releases/download/v4.11.1/JMRI.4.11.1.Rfe44680.exe
- Linux: https://github.com/JMRI/JMRI/releases/download/v4.11.1/JMRI.4.11.1.Rfe44680.tgz
Changes since Production release 4.10:The list of included commits is available from our GitHub code repository.
- Andrew Crosland added persistance to the console
- Mike Dunston provided support for the DCC++ ESP (WiFi enabled) base station and DCC++ESP32 base station.
- Andrew Crosland improved appearance and performance
New / Updated decoder definitions
- Cees Baarda and Egbert Broerse added a definition for the Digirails DR4018 decoder
- Ronald Kuhn and Dave Heap made improvements to the ESU V4 decoder definitions
- Dave Heap improved the support for the NCE Light-It
- Added Walthers OEM SoundCar decoders and some other minor updates:
- minor label changes to aftermarket SoundCar function map
- tooltips for SoundTraxx CV105/106 (used for version number)
- tooltip for Econami CV218; formula has been fixed in Econami manuals tech ref 1.6 - now same as Tsunami2
- Dave Heap improved the support for infoOnly & opsOnly mode variables
- Dave Sand improved the Entry/Exit support. It is now possible to create routes that span panel boundaries if edge connectors have been used to the link the panels.
- Three new Conditional Actions have been added for Entry/Exit.
- Set NX Pair Enabled — Enable a NX Pair. When enabled, it can used to create a route.
- Set NX Pair Disabled — Disable a NX Pair. This will prevent the use of the pair to create a route.
- Set NX Pair Segment Active / Inactive — If the route is not active, create the route, otherwise clear down, cancel or stack the route depending on the default actions or user response.
- Egbert Broerse improved how icons are previewed in the catalog
Turnouts, Lights and other elements
- Fixed a problem where some items would not be displayed in the table when sorted by system name
NX Entry/Exit Logic
- Dave Sand improved the Entry/Exit support. Entry/Exit sensor pairs can be on different Layout Editor panels that have been linked using edge connectors.
- Joan de Castro improved the Catalan translation with help from David Heap and Randall Wood
- Improved logging when errors happen on a SwingWorker thread
- Fixed the RosterCsvExport script so it works without referenced (removed) IndexedCV support
- A ChangePanelFont.py script was provided to let a user change the panel font script
- Fixed a problem with ComboBox (selection box) background coloring on Windows
- Some improvements to logging when internal errors happen on a deferred action