familyname=Command Stations manufacturer=Digitrax definitionSource=JMRI LOCONETCSOPSWMODECV=csOpSw.001,"OpSw 01OpSw 01" CV=csOpSw.002,","Command Station *","","Booster (not recommended)",""DCS52 acts as aOpSw 02" CV=csOpSw.003,"Autoreversing isOpSw 03" CV=csOpSw.004,"OpSw 04OpSw 04" CV=csOpSw.005,"OpSw 05OpSw 05" CV=csOpSw.006,"OpSw 06OpSw 06" CV=csOpSw.007,"OpSw 07OpSw 07" CV=csOpSw.008,"OpSw 08OpSw 08" CV=csOpSw.009,"OpSw 09OpSw 09" CV=csOpSw.010,"OpSw 10OpSw 10" CV=csOpSw.011,"OpSw 11OpSw 11" CV=csOpSw.012,"OpSw 12OpSw 12" CV=csOpSw.014,"Locomotive Purge isOpSw 14" CV=csOpSw.013,"OpSw 014eq0,"200 seconds *","","600 seconds",""Purge time isOpSw 13" CV=csOpSw.015,"OpSw 014eq0,"will not change loco speed *","","will force a loco to 0 speed",""Locomotive Purging willOpSw 15" CV=csOpSw.016,"OpSw 16OpSw 16" CV=csOpSw.017,"OpSw 17OpSw 17" CV=csOpSw.018,"OpSw 18OpSw 18" CV=csOpSw.019,"OpSw 19OpSw 19" CV=csOpSw.020,"Address 00 'Analog stretching' (or conventional locos) isOpSw 20" CV=csOpSw.021,","t","","c",""" CV=csOpSw.022,","t","","c",""" CV=csOpSw.023,","t","","c",""" CV=,"Global System Loco "Speed-step Mode" Default for New Loco AcquisitionOpSw21, OpSw22, OpSw23" CV=csOpSw.024,"OpSw 24OpSw 24" CV=csOpSw.025,"OpSw 25OpSw 25" CV=csOpSw.026,"OpSw 26OpSw 26" CV=csOpSw.027,","propagate to the DCC track signal *","","do not propagate to the DCC track signal (the 'Bushby' bit)","""Normal" Switch commands OpSw 27" CV=csOpSw.028,"Interrogation of turnouts and sensors at power on isOpSw 28" CV=csOpSw.029,"OpSw 29OpSw 29" CV=csOpSw.030,"OpSw 30OpSw 30" CV=csOpSw.031,","Normal *","","Fast (JMRI-recommended)",""Route/switch message output rate isOpSw 31 - the speed at which turnout commands are propagated to the DCC track signal" CV=csOpSw.032,"OpSw 32OpSw 32" CV=csOpSw.033,"OpSw 33OpSw 33" CV=csOpSw.034,"OpSw 34OpSw 34" CV=csOpSw.035,"'Reset' button isOpSw 35" CV=csOpSw.036,","Normal operating state *","","Clears all mobile decoder info and consists",""OpSw 36OpSw 36" CV=csOpSw.037,"OpSw 37OpSw 37" CV=csOpSw.038,","Clears all internal memory states *","","Activates 'Slot zero' feature",""DCS52 Loco Reset ButtonOpSw 38" CV=csOpSw.039,","Normal operating state *","","Clears all internal memory states *",""OpSw 39OpSw 39" CV=csOpSw.040,","Normal*","","Reset DCS52",""OpSw 40A Factory Reset operation can be performed using the DCS52 keyboard via its "Option Switch Setup" feature. JMRI cannot perform this "programmatically"." CV=csOpSw.041,"Diagnostic 'click' on incoming LocoNet activity and Route activationOpSw 41" CV=csOpSw.042,"Two "short beep" indication of loco 'purging' isOpSw 42" CV=csOpSw.043,"LocoNet slot write update of command station's track status isOpSw 43" CV=csOpSw.044,"OpSw 44OpSw 44" CV=csOpSw.045,"OpSw 45OpSw 45" CV=csOpSw.046,"OpSw 46OpSw 46" CV=csOpSw.047,"OpSw 47OpSw 47" CV=csOpSw.048,"OpSw48" CV=csOpSw.049,"OpSw49" CV=csOpSw.050,"OpSw50" CV=csOpSw.051,"OpSw51" CV=csOpSw.052,"OpSw52" CV=csOpSw.053,"OpSw53" CV=csOpSw.054,"OpSw54" CV=csOpSw.055,"OpSw55" CV=csOpSw.056,"OpSw56" CV=csOpSw.057,"OpSw57" CV=csOpSw.058,"OpSw58" CV=csOpSw.059,"OpSw59" CV=csOpSw.060,"OpSw60" CV=csOpSw.061,"OpSw61" CV=csOpSw.062,"OpSw62" CV=csOpSw.063,"OpSw63" CV=csOpSw.064,"OpSw64" CV=csOpSw.065,"OpSw65" CV=csOpSw.066,"OpSw66" CV=csOpSw.067,"OpSw67" CV=csOpSw.068,"OpSw68" CV=csOpSw.069,"OpSw69" CV=csOpSw.070,"OpSw70" CV=csOpSw.071,"OpSw71" CV=csOpSw.072,"OpSw72" CV=csOpSw.073,"OpSw73" CV=csOpSw.074,"OpSw74" CV=csOpSw.075,"OpSw75" CV=csOpSw.076,"OpSw76" CV=csOpSw.077,"OpSw77" CV=csOpSw.078,"OpSw78" CV=csOpSw.079,"OpSw79" CV=csOpSw.080,"OpSw80" CV=csOpSw.081,"OpSw81" CV=csOpSw.082,"OpSw82" CV=csOpSw.083,"DCS52 Jump Ports are OpSw 83" CV=csOpSw.084,"OpSw84" CV=csOpSw.085,"OpSw85" CV=csOpSw.086,"OpSw86" CV=csOpSw.087,"OpSw87" CV=csOpSw.088,"OpSw88" CV=csOpSw.089,"OpSw89" CV=csOpSw.090,"OpSw90" CV=csOpSw.091,"OpSw91" CV=csOpSw.092,"OpSw92" CV=csOpSw.093,"OpSw93" CV=csOpSw.094,"OpSw94" CV=csOpSw.095,"OpSw95" CV=csOpSw.096,"OpSw96" Basic

Basic Operating Mode

Slot "Purging" Management

New Locomotive Management

Jump Port Management

Switch Control Message Management

Command Station Sounds Management

LocoNet Track Status Management

* - Indicates the "Factory Default" setting Track Outputs Control

Track Output Management

Internal Storage Management

Command Station "Loco Reset" Button Management

Command Station Internal Storage Clearing Functions

NOTE:

In order for OpSw36 and/or OpSw39 operations to take effect, it may be necessary to

remove command station power or briefly place the command station into "OpSw" mode via its

front-panel switch.

Note also that JMRI's LocoNet Slot Monitor does not recognize the Command Station OpSw

operations which can clear the slots. It is best to shut down JMRI and re-start after

clearing the Command Station slot table via OpSw 36 or OpSw39 mechanisms.JMRI cannot programmatically modify DCS52 OpSw40. Use a throttle with the DCS52 in "OpSw" mode.Reserved OpSwsThese OpSw ought not be changed from factory default settings.The OpSw settings below cannot be changed by this tool. * - Indicates the "Factory Default" setting OpSwsThe "CV" column in the table above shows "OpSw" numbers, where the value "csOpSw."

is pre-pended to the OpSw Number.

OpSw value 0 = "T"hrown. OpSw value 1 = "C"losed.

Notes

Notes on DCS52 OpSw Settings

  • Several undocumented DCS52 OpSw settings are included here based on trial-and-error testing of effects.
  • When manipulating OpSws 36 or 38, for the purpose of clearing internal

    storage of slots, consists, memory states, etc., it may be necessary to power-cycle the command station.

    The command station may fail to act upon the request if one of these operations is not done.

  • Note that JMRI's LocoNet Slot Monitor does not recognize the Command Station OpSw

    operations which can clear the slots.

    It is best to shut down JMRI and re-start after clearing the Command Station slot table

    using OpSw mechanisms.

  • The 'Global System Loco "Speed-step Mode" Default for New Loco Acquisition' item on the

    "Basic OpSw Settings" 'Sheet' will not be "colorized" to reflect the state of OpSw21,

    OpSw22 and OpSw23, due to limitations of JMRI's mechanisms.

CVsCVCV-TabelleTaula-CVTabulka CVCV-tabelThis sheet intentionally un-populated. See the "OpSws" tab.