Basic
Pulsed Smoke Unit 8415001
CVs
Information
The Massoth pulsed smoke generator for round boilers (model id 8415001) may be retrofitted in most G scale steam locomotives.
It combines pulsed steam and cylinder steam functionality in a single unit.
With an outer diameter of only 30mm,
the unit can be easily installed in smaller G scale locomotives such as the LGB Stainz and Franzburg.
The Massoth Pulsed Smoke Generator for Round Boilers connects directly to track power and operates with DCC speed steps,
hall-effect sensor, or clock signal from a decoder.
With a newly designed fan and optimized airflow this smoke unit makes more smoke than ever.
Overheating and dry-run protection are integrated.
The pulsed smoke generator is equipped with a fully integrated decoder that features a standard loco address and a separate programming address.
POM programming of the smoke generator is thus possible.
the smoke generator's heating element and fan may be independently activated and controlled for optimum smoke effects
several CVs are available for setting temperature of the heating element,
preheating of the element, and various fan speed.
Load-dependent smoke generation is possible when the generator is connected to the SUSI interface terminal of a Massoth eMOTION decoder.
Technical specifications:
Operating voltage : 18 -24V DCC
Operating current: 1000mA
Ambient operating temperature: -4°F to 122°F / -20°C to +50°C
Capacity: 5cc (optimum); 10cc (Maximum untill spill over)
Dimensions: 54x42x30mm