Note, this pane is still work in progress.
Particularly note that strong time for SL75 is CV146, previous decoders were CV129.
Recommend care when changing settings, and take notes. Information on how this pane with
works with different decoders would be welcome.
Sound type selection
Sound type
Full speed rate, or if chuff sensor used,
divider for number of chuff pulses per wheel revolution
Low speed chuff rate (two byte number)
lowbytes of above
highbytes of above
Strong and Weak time sets period for acceleration
and decelleration sounds to be heard
Brake and Acceleration Sounds
Brake Sound Steps (brake squeal)
Acceleration Sound Steps (whistle)
Sound options
evaluate the LGB-pulse from F1
Sound Frequency, alters apparent size of locomotive
Sound Config
Values 0(max) to 3 for older firmware, 0 to 64 for newer firmware
Set function keys to turn on/off main sound and sound slots in Function Map
Slot Sound Levels, automatic and function key repetition rates, CV's 112, 113, 122 to 128, 145
Each slot can play randomly when standing or when moving. Set with checkboxes below.
Sounds can also be played by function key (set in function map), with repetitions and if sound
is made of five components can be made to loop for continuous sounds (see CT manuals)
The Alt key (see Function Map) acts as a 'shift'; when the Alt is active, sound slots 9-16
are played in place of slots 1-8, with the same key and repetition options for each bank of slots
Random time between sounds selected below (0.5sec)
Sound slot 1/ 9 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 2/10 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 3/11 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 4/12 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 5/13 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 6/14 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 7/15 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound slot 8/16 volume
Standing
Running
Repetitions
Fn Key Repetitions
Fn Loop
Sound Slots and Repetition
Yard Mode (select function key in function map)
Shunting CV3 and 4 disabled
Shunting max.half speed forw+rev
Rev.max.speed 65% indep. of Yard mode
Diode Braking. Applies certain hardware only.
(Lenz ABC)
Automatic Uncoupling
Backup relieve coupling tension
Drive forwards to clear train
Function Outputs to operate coupling
Loco going fwd, rear coupler
Loco going bwd, front coupler
Uncoupler Assignment
Yard mode and Auto Uncoupling
Output Dimming
Function Key Controlled Dimming
CV 116-118
Note, Function Key 'on' will remove
the dimming from a lamp.
F-Key For Dimming
Dimming level (0-100)
F-Key Dims FL(f)
F-Key Dims FL(r)
F-Key Dims F1
F-Key Dims F2
Light Effects
CV 114/115 and CV 154-157
Dimming of Effect (0-100)
Time Between Effects (0-255)
Effect FL(f) (white)
Direction
Effect FL(r) (yellow)
Direction
Effect F1 (green)
Direction
Effect F2 (purple)
Direction
Output Dimming, Effects and Uncoupler
Zimo Features
LGB Features
CT Alternative CV Set
Roco LGB Zimo CT
Lock and Shortcircuit Threshholds