<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet type="text/xsl" href="../XSLT/decoder.xsl"?>
<!-- Copyright (C) JMRI 2005, 2006, 2007 All rights reserved -->
<!-- $Id: SoundTraxx_Tsu_Steam_Genesis.xml 17977 2011-07-18 17:23:46Z zoo $ -->
<!--                                                                        -->
<!-- JMRI is free software; you can redistribute it and/or modify it under  -->
<!-- the terms of version 2 of the GNU General Public License as published  -->
<!-- by the Free Software Foundation. See the "COPYING" file for a copy     -->
<!-- of this license.                                                       -->
<!--                                                                        -->
<!-- JMRI is distributed in the hope that it will be useful, but WITHOUT    -->
<!-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or  -->
<!-- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License  -->
<!-- for more details.                                                      -->
<decoder-config xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://jmri.org/xml/schema/decoder.xsd">
  <version author="Michael Mosher" version="1" lastUpdated="20100605"/>
  <version author="Michael Mosher" version="2" lastUpdated="20100828"/>

<!-- This file contains the Tsunami definitions for Genesis OEM steam locomotives	-->

<!-- version 1	Based on the "SoundTraxx_Tsu_Steam.xml" Ver 5 file.						-->
<!-- version 2	Add Rule 17 bit to CV51 & 52 -->

<!-- Decoder Model information follows -->
  <decoder>
    <family name="Tsunami Steam Genesis OEM" mfg="Throttle-Up (SoundTraxx)" comment="These are OEM for Athearn Genesis Tsunami steam decoders">
      <model model="Bigboy 4-8-8-4" numOuts="4" numFns="14" connector="other" productID="BB" >
        <versionCV lowVersionID="64"/>
        <output name="Whistle"/>
        <output name="Bell"/>
        <output name="3" label="  FX5  "/>
        <output name="4" label="  FX6  "/>
        <output name="Dynamo"/>
        <output name="Short-Whistle"/>
        <output name="Steam-Release"/>
        <output name="Water-Stop"/>
        <output name="Dimming"/>
        <output name="Mute"/>
        <output name="Injector"/>
        <output name="Brake-Squeal"/>
        <output name="Coupler"/>
      </model>
      <model model="MT-4 4-8-2" numOuts="4" numFns="14" connector="other" productID="MT4" >
        <versionCV lowVersionID="64"/>
        <output name="Whistle"/>
        <output name="Bell"/>
        <output name="3" label="  FX5  "/>
        <output name="4" label="  FX6  "/>
        <output name="Dynamo"/>
        <output name="Short-Whistle"/>
        <output name="Steam-Release"/>
        <output name="Water-Stop"/>
        <output name="Dimming"/>
        <output name="Mute"/>
        <output name="Injector"/>
        <output name="Brake-Squeal"/>
        <output name="Coupler"/>
      </model>
      <model model="N Challenger" numOuts="4" numFns="14" connector="other" productID="N_Chal" >
        <versionCV lowVersionID="64"/>
        <output name="Whistle"/>
        <output name="Bell"/>
        <output name="3" label="  FX5  "/>
        <output name="4" label="  FX6  "/>
        <output name="Dynamo"/>
        <output name="Short-Whistle"/>
        <output name="Steam-Release"/>
        <output name="Water-Stop"/>
        <output name="Dimming"/>
        <output name="Mute"/>
        <output name="Injector"/>
        <output name="Brake-Squeal"/>
        <output name="Coupler"/>
      </model>
    </family>
    <programming direct="yes" paged="yes" register="yes" ops="yes"/>
<!-- Configuration Variable (CV) information follows -->
    <variables>
      <variable label="Primary Address (1-127)" CV="1" item="Short Address" default="3" tooltip="Sets the Primary (short, 2 digit) address">
        <shortAddressVal/>
        <label>Primary Address (1-127)</label>
      </variable>
      <variable label="Start Voltage (0-255)" CV="2" item="Vstart" default="0" comment="A value of 255 corresponds to full voltage available" tooltip="Sets the starting voltage at throttle speed step 1">
        <decVal/>
        <label>Start Voltage (0-255)</label>
        <comment>A value of 255 corresponds to full voltage available</comment>
      </variable>
      <variable label="Acceleration Rate (0-255)" CV="3" item="Accel" default="0" tooltip="Sets the acceleration rate (delay).  Higher number = slower rate">
        <decVal/>
        <label>Acceleration Rate (0-255)</label>
      </variable>
      <variable label="Braking Rate (0-255)" CV="4" item="Decel" default="0" tooltip="Sets the deceleration rate (delay).  Higher number = slower rate">
        <decVal/>
        <label>Braking Rate (0-255)</label>
      </variable>
      <variable label="Manufacturer Version ID" CV="7" readOnly="yes" item="Decoder Version" tooltip="This is the decoder software version identifier (read only)">
        <decVal/>
        <label>Manufacturer Version ID</label>
      </variable>
      <variable label="Manufacturer ID" CV="8" readOnly="yes" item="Manufacturer">
        <decVal/>
        <label>Manufacturer ID</label>
      </variable>
      <variable label="BEMF Cutout (0-127 or 128-255)" CV="10" item="EMF Feedback Cutout" default="0" tooltip="&lt;html&gt;Up to 127, this sets the speed step above which the intensity of BEMF control will be reduced&lt;br&gt;     to zero.  Values over 127 cause the BEMF to decrease as a percentage (up to 50%).&lt;/html&gt;">
        <decVal/>
        <label>BEMF Cutout (0-127 or 128-255)</label>
      </variable>
      <variable label="Packet Time Out Value (0-255)" CV="11" item="Packet Time-out Value" default="0" tooltip="&lt;html&gt;Sets the time period that is allowed to elapse between receipts of a valid packet&lt;br&gt;     addressed to the decoder before a throttle shutdown occurs.  Enter zero to disable.&lt;/html&gt;">
        <decVal/>
        <label>Packet Time Out Value (0-255)</label>
      </variable>
      <variable label="Power Source Conversion Type" CV="12" mask="XXXXXXXV" item="Analog Power Conversion" default="1" tooltip="&lt;html&gt;Defines the type of power source the decoder should&lt;br&gt;     switch to whenever a DCC signal is not present.&lt;br&gt;     (Tip: Alternate Power Source must be enabled)&lt;/html&gt;">
        <enumVal>
          <enumChoice choice="No alternate power source available">
            <choice>No alternate power source available</choice>
          </enumChoice>
          <enumChoice choice="Analog power supply">
            <choice>Analog power supply</choice>
          </enumChoice>
        </enumVal>
        <label>Power Source Conversion Type</label>
      </variable>
      <variable label="Analog Mode Function Status - F1" CV="13" mask="XXXXXXXV" default="0" tooltip="Check to enable function F1 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F1</label>
      </variable>
      <variable label="Analog Mode Function Status - F2" CV="13" mask="XXXXXXVX" default="0" tooltip="Check to enable function F2 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F2</label>
      </variable>
      <variable label="Analog Mode Function Status - F3" CV="13" mask="XXXXXVXX" default="0" tooltip="Check to enable function F3 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F3</label>
      </variable>
      <variable label="Analog Mode Function Status - F4" CV="13" mask="XXXXVXXX" default="0" tooltip="Check to enable function F4 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F4</label>
      </variable>
      <variable label="Analog Mode Function Status - F5" CV="13" mask="XXXVXXXX" default="0" tooltip="Check to enable function F5 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F5</label>
      </variable>
      <variable label="Analog Mode Function Status - F6" CV="13" mask="XXVXXXXX" default="0" include="BB" tooltip="Check to enable function F6 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F6</label>
      </variable>
      <variable label="Analog Mode Function Status - F6" CV="13" mask="XXVXXXXX" default="1" include="MT4,N_Chal" tooltip="Check to enable function F6 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F6</label>
      </variable>
      <variable label="Analog Mode Function Status - F7" CV="13" mask="XVXXXXXX" default="0" tooltip="Check to enable function F7 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F7</label>
      </variable>
      <variable label="Analog Mode Function Status - F8" CV="13" mask="VXXXXXXX" default="0" tooltip="Check to enable function F8 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F8</label>
      </variable>
      <variable label="Analog Mode Function Status - F0(f)" CV="14" mask="XXXXXXXV" default="0" tooltip="Check to enable function F0(f) when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F0(f)</label>
      </variable>
      <variable label="Analog Mode Function Status - F0(r)" CV="14" mask="XXXXXXVX" default="0" tooltip="Check to enable function F0(r) when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F0(r)</label>
      </variable>
      <variable label="Analog Mode Function Status - F9" CV="14" mask="XXXXXVXX" default="0" tooltip="Check to enable function F9 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F9</label>
      </variable>
      <variable label="Analog Mode Function Status - F10" CV="14" mask="XXXXVXXX" default="0" tooltip="Check to enable function F10 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F10</label>
      </variable>
      <variable label="Analog Mode Function Status - F11" CV="14" mask="XXXVXXXX" default="0" tooltip="Check to enable function F11 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F11</label>
      </variable>
      <variable label="Analog Mode Function Status - F12" CV="14" mask="XXVXXXXX" default="0" tooltip="Check to enable function F12 when the unit is operating in analog power mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Analog Mode Function Status - F12</label>
      </variable>
      <variable label="CV Unlock Register (0-7)" CV="15" mask="XXXXXVVV" item="Advanced Group 1 Option 1" default="0" tooltip="&lt;html&gt;Enter the Lock ID Code to unlock access to the decoder CVs.&lt;br&gt;     (Tip: Establish the unlock code with CV Lock ID Code)&lt;/html&gt;">
        <decVal/>
        <label>CV Unlock Register (0-7)</label>
      </variable>
      <variable label="CV Lock ID Code (0-7)" CV="16" mask="XXXXXVVV" item="Advanced Group 1 Option 2" default="0" tooltip="Sets the unlock code that must be entered into the CV Unlock Register in order to access the decoder CVs">
        <decVal/>
        <label>CV Lock ID Code (0-7)</label>
      </variable>
      <variable label="Extended Address (0001-9999)" CV="17" item="Long Address" tooltip="Sets the Extended (long, 4 digit) address">
        <longAddressVal/>
        <label>Extended Address (0001-9999)</label>
      </variable>
<!-- Consisting Information follows -->
      <variable label="Consist Address (0-127)" CV="19" mask="XVVVVVVV" item="Consist Address" default="0" comment="Stores consist address. Range 0-127 (direction set in bit 7)">
        <decVal max="127"/>
        <label>Consist Address (0-127)</label>
        <comment>Stores consist address. Range 0-127 (direction set in bit 7)</comment>
      </variable>
      <variable label="Loco Direction In Consist" CV="19" mask="VXXXXXXX" item="Consist Direction" default="0" comment="A consist address over 127 will also set this bit">
        <enumVal>
          <enumChoice choice="Normal">
            <choice>Normal</choice>
          </enumChoice>
          <enumChoice choice="Reversed">
            <choice>Reversed</choice>
          </enumChoice>
        </enumVal>
        <label>Loco Direction In Consist</label>
        <comment>A consist address over 127 will also set this bit</comment>
      </variable>
      <variable label="Consist Address Activation for F1" CV="21" mask="XXXXXXXV" item="Consist Address Active For F1" default="0" minFn="1">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F1</label>
      </variable>
      <variable label="Consist Address Activation for F2" CV="21" mask="XXXXXXVX" item="Consist Address Active For F2" default="0" minFn="2">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F2</label>
      </variable>
      <variable label="Consist Address Activation for F3" CV="21" mask="XXXXXVXX" item="Consist Address Active For F3" default="0" minFn="3">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F3</label>
      </variable>
      <variable label="Consist Address Activation for F4" CV="21" mask="XXXXVXXX" item="Consist Address Active For F4" default="0" minFn="4">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F4</label>
      </variable>
      <variable label="Consist Address Activation for F5" CV="21" mask="XXXVXXXX" item="Consist Address Active For F5" default="0" minFn="5">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F5</label>
      </variable>
      <variable label="Consist Address Activation for F6" CV="21" mask="XXVXXXXX" item="Consist Address Active For F6" default="0" minFn="6">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F6</label>
      </variable>
      <variable label="Consist Address Activation for F7" CV="21" mask="XVXXXXXX" item="Consist Address Active For F7" default="0" minFn="7">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F7</label>
      </variable>
      <variable label="Consist Address Activation for F8" CV="21" mask="VXXXXXXX" item="Consist Address Active For F8" default="0" minFn="8">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F8</label>
      </variable>
      <variable label="Consist Address Activation for F0(f) in Forward" CV="22" mask="XXXXXXXV" item="Consist Address Active For FL in Forward" default="0">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F0(f) in Forward</label>
      </variable>
      <variable label="Consist Address Activation for F0(r) in Reverse" CV="22" mask="XXXXXXVX" item="Consist Address Active For FL in Reverse" default="0">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F0(r) in Reverse</label>
      </variable>
      <variable label="Consist Address Activation for F9" CV="22" mask="XXXXXVXX" item="Consist Address Active For F9" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F9</label>
      </variable>
      <variable label="Consist Address Activation for F10" CV="22" mask="XXXXVXXX" item="Consist Address Active For F10" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F10</label>
      </variable>
      <variable label="Consist Address Activation for F11" CV="22" mask="XXXVXXXX" item="Consist Address Active For F11" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F11</label>
      </variable>
      <variable label="Consist Address Activation for F12" CV="22" mask="XXVXXXXX" item="Consist Address Active For F12" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="Respond to locomotive address only">
            <choice>Respond to locomotive address only</choice>
          </enumChoice>
          <enumChoice choice="Respond to consist address">
            <choice>Respond to consist address</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Address Activation for F12</label>
      </variable>
      <variable label="Consist Acceleration Rate (0-127)" CV="23" mask="XVVVVVVV" item="Consist Acceleration Adjustment" default="0" comment="Additional consist acceleration (combined with CV3)" tooltip="When loco is in a consist, it's base acceleration rate is modified by this amount">
        <decVal max="127"/>
        <label>Consist Acceleration Rate (0-127)</label>
        <comment>Additional consist acceleration (combined with CV3)</comment>
      </variable>
      <variable label="Consist Acceleration Sign" CV="23" mask="VXXXXXXX" item="Consist Acceleration Adjustment Sign" default="0">
        <enumVal>
          <enumChoice choice="Add value to base acceleration rate (increases acceleration delay)">
            <choice>Add value to base acceleration rate (increases acceleration delay)</choice>
          </enumChoice>
          <enumChoice choice="Subtract value from base acceleration rate (decreases acceleration delay)">
            <choice>Subtract value from base acceleration rate (decreases acceleration delay)</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Acceleration Sign</label>
      </variable>
      <variable label="Consist Braking Rate (0-127)" CV="24" mask="XVVVVVVV" item="Consist Deceleration Adjustment" default="0" comment="Additional consist braking (combined with CV4)" tooltip="When loco is in a consist, it's baseline braking rate is modified by this amount">
        <decVal max="127"/>
        <label>Consist Braking Rate (0-127)</label>
        <comment>Additional consist braking (combined with CV4)</comment>
      </variable>
      <variable label="Consist Braking Sign" CV="24" mask="VXXXXXXX" item="Consist Deceleration Adjustment Sign" default="0" tooltip="Determines whether value is added to or subtracted from loco baseline braking rate">
        <enumVal>
          <enumChoice choice="Add value to baseline braking rate (increases braking delay)">
            <choice>Add value to baseline braking rate (increases braking delay)</choice>
          </enumChoice>
          <enumChoice choice="Subtract value from baseline braking rate (decreases braking delay)">
            <choice>Subtract value from baseline braking rate (decreases braking delay)</choice>
          </enumChoice>
        </enumVal>
        <label>Consist Braking Sign</label>
      </variable>
      <variable label="Speed Table Selection" CV="25" mask="XXXVVVVV" default="0" tooltip="Select a manufacturers speed curve, or use a curve you define yourself.">
        <enumVal>
          <enumChoice choice="Disabled, Speed Curves not used">
            <choice>Disabled, Speed Curves not used</choice>
          </enumChoice>
          <enumChoice choice="Disabled, Speed Curves not used">
            <choice>Disabled, Speed Curves not used</choice>
          </enumChoice>
          <enumChoice choice="Linear Speed Curve (Straight Line)">
            <choice>Linear Speed Curve (Straight Line)</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 1">
            <choice>Logarithmic Curve 1</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 2">
            <choice>Logarithmic Curve 2</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 3">
            <choice>Logarithmic Curve 3</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 4">
            <choice>Logarithmic Curve 4</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 5">
            <choice>Logarithmic Curve 5</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 6">
            <choice>Logarithmic Curve 6</choice>
          </enumChoice>
          <enumChoice choice="Logarithmic Curve 7">
            <choice>Logarithmic Curve 7</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 1">
            <choice>Exponential Curve 1</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 2">
            <choice>Exponential Curve 2</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 3">
            <choice>Exponential Curve 3</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 4">
            <choice>Exponential Curve 4</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 5">
            <choice>Exponential Curve 5</choice>
          </enumChoice>
          <enumChoice choice="Exponential Curve 6">
            <choice>Exponential Curve 6</choice>
          </enumChoice>
          <enumChoice choice="User Defined Speed Table">
            <choice>User Defined Speed Table</choice>
          </enumChoice>
        </enumVal>
        <label>Speed Table Selection</label>
      </variable>
      <variable label="Locomotive's Normal Direction of Motion" CV="29" mask="XXXXXXXV" item="Locomotive Direction" default="0">
        <enumVal>
          <enumChoice choice="Forward">
            <choice>Forward</choice>
          </enumChoice>
          <enumChoice choice="Reverse">
            <choice>Reverse</choice>
          </enumChoice>
        </enumVal>
        <label>Locomotive's Normal Direction of Motion</label>
      </variable>
      <variable label="Speed Steps" CV="29" mask="XXXXXXVX" item="Speed Step Mode" default="1">
        <enumVal>
          <enumChoice choice="14">
            <choice>14</choice>
          </enumChoice>
          <enumChoice choice="28/128">
            <choice>28/128</choice>
          </enumChoice>
        </enumVal>
        <label>Speed Steps</label>
      </variable>
      <variable label="Alternate Power Source Enable" CV="29" mask="XXXXXVXX" item="Analog (DC) Operation" default="1">
        <enumVal>
          <enumChoice choice="NMRA Digital Only">
            <choice>NMRA Digital Only</choice>
          </enumChoice>
          <enumChoice choice="Alternate Power Source Enabled">
            <choice>Alternate Power Source Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Alternate Power Source Enable</label>
      </variable>
      <variable label="Use Speed Table" CV="29" mask="XXXVXXXX" item="Speed Table Definition" default="0">
        <enumVal>
          <enumChoice choice="Use factory speed table)">
            <choice>Use Start Voltage (Vstart)</choice>
          </enumChoice>
          <enumChoice choice="Use speed table as defined speed table selection">
            <choice>Use Speed Table</choice>
          </enumChoice>
        </enumVal>
        <label>Use Speed Table</label>
      </variable>
      <variable label="Extended Address Mode" CV="29" mask="XXVXXXXX" item="Address Format" default="0">
        <enumVal>
          <enumChoice choice="Use 2 digit address (primary address)">
            <choice>Use 2 digit address (primary address)</choice>
          </enumChoice>
          <enumChoice choice="Use 4 digit address (extended address)">
            <choice>Use 4 digit address (extended address)</choice>
          </enumChoice>
        </enumVal>
        <label>Extended Address Mode</label>
      </variable>
      <variable label="CV Lock Enable" CV="30" mask="XXXXXXXV" item="Advanced Group 1 Option 3" default="0" tooltip="Enable locking of CVs when decoder is used in a multi-decoder installation">
        <enumVal>
          <enumChoice choice="Normal operation (no locking)">
            <choice>Normal operation (no locking)</choice>
          </enumChoice>
          <enumChoice choice="Enable CV Lock as set in CVs 15 and 16">
            <choice>Enable CV Lock as set in CVs 15 and 16</choice>
          </enumChoice>
        </enumVal>
        <label>CV Lock Enable</label>
      </variable>
      <variable label="CV Clear (CVCLR)" CV="30" mask="XXXXXXVX" item="Advanced Group 1 Option 4" default="0" tooltip="Tip: To do a one-time decoder reset, use the menu [Reset] selection">
        <enumVal>
          <enumChoice choice="Normal operation">
            <choice>Normal operation</choice>
          </enumChoice>
          <enumChoice choice="Reset all CVs to default values at next power cycle">
            <choice>Reset all CVs to default values at next power cycle</choice>
          </enumChoice>
        </enumVal>
        <label>CV Clear (CVCLR)</label>
      </variable>
      <variable label="Function Group 2 and 3 Exchange" CV="30" mask="XXXXXVXX" item="Advanced Group 1 Option 5" default="0" tooltip="Function Group 2 (F5-F8) assignments are swapped with Function Group 3 (F9-F12)">
        <enumVal>
          <enumChoice choice="Normal">
            <choice>Normal</choice>
          </enumChoice>
          <enumChoice choice="Exchange Group 2 (F5-F8) and Group 3 (F9-F12)">
            <choice>Exchange Group 2 (F5-F8) and Group 3 (F9-F12)</choice>
          </enumChoice>
        </enumVal>
        <label>Function Group 2 and 3 Exchange</label>
      </variable>
<!-- Function Mapping follows -->
      <variable label="FL(f) controls Headlight" CV="33" mask="XXXXXXXV" item="FL(f) controls output 1" minOut="1" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls Headlight</label>
      </variable>
      <variable label="FL(f) controls Backup Light" CV="33" mask="XXXXXXVX" item="FL(f) controls output 2" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls Backup Light</label>
      </variable>
      <variable label="FL(f) controls output Whistle" CV="33" mask="XXXXXVXX" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output Whistle</label>
      </variable>
      <variable label="FL(f) controls output Bell" CV="33" mask="XXXXVXXX" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output Bell</label>
      </variable>
      <variable label="FL(f) controls output FX5" CV="33" mask="XXXVXXXX" item="FL(f) controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output FX5</label>
      </variable>
      <variable label="FL(f) controls output FX6" CV="33" mask="XXVXXXXX" item="FL(f) controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output FX6</label>
      </variable>
      <variable label="FL(f) controls output Dynamo" CV="33" mask="XVXXXXXX" minOut="1" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output Dynamo</label>
      </variable>
      <variable label="FL(f) controls output Short-Whistle" CV="33" mask="VXXXXXXX" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(f) controls output Short-Whistle</label>
      </variable>
      <variable label="FL(r) controls Headlight" CV="34" mask="XXXXXXXV" item="FL(r) controls output 1" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls Headlight</label>
      </variable>
      <variable label="FL(r) controls Backup Light" CV="34" mask="XXXXXXVX" item="FL(r) controls output 2" minOut="2" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls Backup Light</label>
      </variable>
      <variable label="FL(r) controls output Whistle" CV="34" mask="XXXXXVXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output Whistle</label>
      </variable>
      <variable label="FL(r) controls output Bell" CV="34" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output Bell</label>
      </variable>
      <variable label="FL(r) controls output FX5" CV="34" mask="XXXVXXXX" item="FL(r) controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output FX5</label>
      </variable>
      <variable label="FL(r) controls output FX6" CV="34" mask="XXVXXXXX" item="FL(r) controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output FX6</label>
      </variable>
      <variable label="FL(r) controls output Dynamo" CV="34" mask="XVXXXXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output Dynamo</label>
      </variable>
      <variable label="FL(r) controls output Short-Whistle" CV="34" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>FL(r) controls output Short-Whistle</label>
      </variable>
      <variable label="F1 controls Headlight" CV="35" mask="XXXXXXXV" item="F1 controls output 1" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls Headlight</label>
      </variable>
      <variable label="F1 controls Backup Light" CV="35" mask="XXXXXXVX" item="F1 controls output 2" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls Backup Light</label>
      </variable>
      <variable label="F1 controls output Whistle" CV="35" mask="XXXXXVXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output Whistle</label>
      </variable>
      <variable label="F1 controls output Bell" CV="35" mask="XXXXVXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output Bell</label>
      </variable>
      <variable label="F1 controls output FX5" CV="35" mask="XXXVXXXX" item="F1 controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output FX5</label>
      </variable>
      <variable label="F1 controls output FX6" CV="35" mask="XXVXXXXX" item="F1 controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output FX6</label>
      </variable>
      <variable label="F1 controls output Dynamo" CV="35" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output Dynamo</label>
      </variable>
      <variable label="F1 controls output Short-Whistle" CV="35" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F1 controls output Short-Whistle</label>
      </variable>
      <variable label="F2 controls Headlight" CV="36" mask="XXXXXXXV" item="F2 controls output 1" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls Headlight</label>
      </variable>
      <variable label="F2 controls Backup Light" CV="36" mask="XXXXXXVX" item="F2 controls output 2" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls Backup Light</label>
      </variable>
      <variable label="F2 controls output Whistle" CV="36" mask="XXXXXVXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output Whistle</label>
      </variable>
      <variable label="F2 controls output Bell" CV="36" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output Bell</label>
      </variable>
      <variable label="F2 controls output FX5" CV="36" mask="XXXVXXXX" item="F2 controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output FX5</label>
      </variable>
      <variable label="F2 controls output FX6" CV="36" mask="XXVXXXXX" item="F2 controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output FX6</label>
      </variable>
      <variable label="F2 controls output Dynamo" CV="36" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output Dynamo</label>
      </variable>
      <variable label="F2 controls output Short-Whistle" CV="36" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F2 controls output Short-Whistle</label>
      </variable>
      <variable label="F3 controls output Bell" CV="37" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Bell</label>
      </variable>
      <variable label="F3 controls output FX5" CV="37" mask="XXXXXXVX" item="F3 controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output FX5</label>
      </variable>
      <variable label="F3 controls output FX6" CV="37" mask="XXXXXVXX" item="F3 controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output FX6</label>
      </variable>
      <variable label="F3 controls output Dynamo" CV="37" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Dynamo</label>
      </variable>
      <variable label="F3 controls output Short-Whistle" CV="37" mask="XXXVXXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Short-Whistle</label>
      </variable>
      <variable label="F3 controls output Steam-Release" CV="37" mask="XXVXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Steam-Release</label>
      </variable>
      <variable label="F3 controls output Water-Stop" CV="37" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Water-Stop</label>
      </variable>
      <variable label="F3 controls output Dimming" CV="37" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F3 controls output Dimming</label>
      </variable>
      <variable label="F4 controls output Bell" CV="38" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Bell</label>
      </variable>
      <variable label="F4 controls output FX5" CV="38" mask="XXXXXXVX" item="F4 controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output FX5</label>
      </variable>
      <variable label="F4 controls output FX6" CV="38" mask="XXXXXVXX" item="F4 controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output FX6</label>
      </variable>
      <variable label="F4 controls output Dynamo" CV="38" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Dynamo</label>
      </variable>
      <variable label="F4 controls output Short-Whistle" CV="38" mask="XXXVXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Short-Whistle</label>
      </variable>
      <variable label="F4 controls output Steam-Release" CV="38" mask="XXVXXXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Steam-Release</label>
      </variable>
      <variable label="F4 controls output Water-Stop" CV="38" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Water-Stop</label>
      </variable>
      <variable label="F4 controls output Dimming" CV="38" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F4 controls output Dimming</label>
      </variable>
      <variable label="F5 controls output Bell" CV="39" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Bell</label>
      </variable>
      <variable label="F5 controls output FX5" CV="39" mask="XXXXXXVX" item="F5 controls output 3" minOut="1" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output FX5</label>
      </variable>
      <variable label="F5 controls output FX6" CV="39" mask="XXXXXVXX" item="F5 controls output 4" minOut="2" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output FX6</label>
      </variable>
      <variable label="F5 controls output Dynamo" CV="39" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Dynamo</label>
      </variable>
      <variable label="F5 controls output Short-Whistle" CV="39" mask="XXXVXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Short-Whistle</label>
      </variable>
      <variable label="F5 controls output Steam-Release" CV="39" mask="XXVXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Steam-Release</label>
      </variable>
      <variable label="F5 controls output Water-Stop" CV="39" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Water-Stop</label>
      </variable>
      <variable label="F5 controls output Dimming" CV="39" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F5 controls output Dimming</label>
      </variable>
      <variable label="F6 controls output Bell" CV="40" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Bell</label>
      </variable>
      <variable label="F6 controls output FX5" CV="40" mask="XXXXXXVX" item="F6 controls output 3" minOut="1" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output FX5</label>
      </variable>
      <variable label="F6 controls output FX6" CV="40" mask="XXXXXVXX" item="F6 controls output 4" minOut="2" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output FX6</label>
      </variable>
      <variable label="F6 controls output Dynamo" CV="40" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Dynamo</label>
      </variable>
      <variable label="F6 controls output Short-Whistle" CV="40" mask="XXXVXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Short-Whistle</label>
      </variable>
      <variable label="F6 controls output Steam-Release" CV="40" mask="XXVXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Steam-Release</label>
      </variable>
      <variable label="F6 controls output Water-Stop" CV="40" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Water-Stop</label>
      </variable>
      <variable label="F6 controls output Dimming" CV="40" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F6 controls output Dimming</label>
      </variable>
      <variable label="F7 controls output Dynamo" CV="41" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Dynamo</label>
      </variable>
      <variable label="F7 controls output Short-Whistle" CV="41" mask="XXXXXXVX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Short-Whistle</label>
      </variable>
      <variable label="F7 controls output Steam-Release" CV="41" mask="XXXXXVXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Steam-Release</label>
      </variable>
      <variable label="F7 controls output Water-Stop" CV="41" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Water-Stop</label>
      </variable>
      <variable label="F7 controls output Dimming" CV="41" mask="XXXVXXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Dimming</label>
      </variable>
      <variable label="F7 controls output Mute" CV="41" mask="XXVXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Mute</label>
      </variable>
      <variable label="F7 controls output Injector" CV="41" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Injector</label>
      </variable>
      <variable label="F7 controls output Brake-Squeal" CV="41" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F7 controls output Brake-Squeal</label>
      </variable>
      <variable label="F8 controls output Dynamo" CV="42" mask="XXXXXXXV" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Dynamo</label>
      </variable>
      <variable label="F8 controls output Short-Whistle" CV="42" mask="XXXXXXVX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Short-Whistle</label>
      </variable>
      <variable label="F8 controls output Steam-Release" CV="42" mask="XXXXXVXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Steam-Release</label>
      </variable>
      <variable label="F8 controls output Water-Stop" CV="42" mask="XXXXVXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Water-Stop</label>
      </variable>
      <variable label="F8 controls output Dimming" CV="42" mask="XXXVXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Dimming</label>
      </variable>
      <variable label="F8 controls output Mute" CV="42" mask="XXVXXXXX" default="1">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Mute</label>
      </variable>
      <variable label="F8 controls output Injector" CV="42" mask="XVXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Injector</label>
      </variable>
      <variable label="F8 controls output Brake-Squeal" CV="42" mask="VXXXXXXX" default="0">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F8 controls output Brake-Squeal</label>
      </variable>
      <variable label="F9 controls output Dynamo" CV="43" mask="XXXXXXXV" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Dynamo</label>
      </variable>
      <variable label="F9 controls output Short-Whistle" CV="43" mask="XXXXXXVX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Short-Whistle</label>
      </variable>
      <variable label="F9 controls output Steam-Release" CV="43" mask="XXXXXVXX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Steam-Release</label>
      </variable>
      <variable label="F9 controls output Water-Stop" CV="43" mask="XXXXVXXX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Water-Stop</label>
      </variable>
      <variable label="F9 controls output Dimming" CV="43" mask="XXXVXXXX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Dimming</label>
      </variable>
      <variable label="F9 controls output Mute" CV="43" mask="XXVXXXXX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Mute</label>
      </variable>
      <variable label="F9 controls output Injector" CV="43" mask="XVXXXXXX" default="0" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Injector</label>
      </variable>
      <variable label="F9 controls output Brake-Squeal" CV="43" mask="VXXXXXXX" default="1" minFn="9">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F9 controls output Brake-Squeal</label>
      </variable>
      <variable label="F10 controls output Short-Whistle" CV="44" mask="XXXXXXXV" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Short-Whistle</label>
      </variable>
      <variable label="F10 controls output Steam-Release" CV="44" mask="XXXXXXVX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Steam-Release</label>
      </variable>
      <variable label="F10 controls output Water-Stop" CV="44" mask="XXXXXVXX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Water-Stop</label>
      </variable>
      <variable label="F10 controls output Dimming" CV="44" mask="XXXXVXXX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Dimming</label>
      </variable>
      <variable label="F10 controls output Mute" CV="44" mask="XXXVXXXX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Mute</label>
      </variable>
      <variable label="F10 controls output Injector" CV="44" mask="XXVXXXXX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Injector</label>
      </variable>
      <variable label="F10 controls output Brake-Squeal" CV="44" mask="XVXXXXXX" default="0" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Brake-Squeal</label>
      </variable>
      <variable label="F10 controls output Coupler" CV="44" mask="VXXXXXXX" default="1" minFn="10">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F10 controls output Coupler</label>
      </variable>
      <variable label="F11 controls output Short-Whistle" CV="45" mask="XXXXXXXV" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Short-Whistle</label>
      </variable>
      <variable label="F11 controls output Steam-Release" CV="45" mask="XXXXXXVX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Steam-Release</label>
      </variable>
      <variable label="F11 controls output Water-Stop" CV="45" mask="XXXXXVXX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Water-Stop</label>
      </variable>
      <variable label="F11 controls output Dimming" CV="45" mask="XXXXVXXX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Dimming</label>
      </variable>
      <variable label="F11 controls output Mute" CV="45" mask="XXXVXXXX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Mute</label>
      </variable>
      <variable label="F11 controls output Injector" CV="45" mask="XXVXXXXX" default="1" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Injector</label>
      </variable>
      <variable label="F11 controls output Brake-Squeal" CV="45" mask="XVXXXXXX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Brake-Squeal</label>
      </variable>
      <variable label="F11 controls output Coupler" CV="45" mask="VXXXXXXX" default="0" minFn="11">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F11 controls output Coupler</label>
      </variable>
      <variable label="F12 controls output Short-Whistle" CV="46" mask="XXXXXXXV" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Short-Whistle</label>
      </variable>
      <variable label="F12 controls output Steam-Release" CV="46" mask="XXXXXXVX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Steam-Release</label>
      </variable>
      <variable label="F12 controls output Water-Stop" CV="46" mask="XXXXXVXX" default="1" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Water-Stop</label>
      </variable>
      <variable label="F12 controls output Dimming" CV="46" mask="XXXXVXXX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Dimming</label>
      </variable>
      <variable label="F12 controls output Mute" CV="46" mask="XXXVXXXX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Mute</label>
      </variable>
      <variable label="F12 controls output Injector" CV="46" mask="XXVXXXXX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Injector</label>
      </variable>
      <variable label="F12 controls output Brake-Squeal" CV="46" mask="XVXXXXXX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Brake-Squeal</label>
      </variable>
      <variable label="F12 controls output Coupler" CV="46" mask="VXXXXXXX" default="0" minFn="12">
        <enumVal>
          <enumChoice choice="No">
            <choice>No</choice>
          </enumChoice>
          <enumChoice choice="Yes">
            <choice>Yes</choice>
          </enumChoice>
        </enumVal>
        <label>F12 controls output Coupler</label>
      </variable>
      <variable label="Analog Whistle Control (0-255)" CV="47" mask="XVVVVVVV" item="Sound Option 12" default="0" tooltip="Value of 0 = Disabled.  See command station instructions for the value to enable this feature.">
        <decVal/>
        <label>Analog Whistle Control (0-255)</label>
      </variable>
<!-- Lighting Configuration follows -->
      <variable label="Headlight F0(f) Effect Selection" CV="49" mask="XXXXVVVV" default="15" tooltip="Determines the effect generated from the headlight">
        <enumVal>
          <enumChoice choice="On/Off">
            <choice>On/Off</choice>
          </enumChoice>
          <enumChoice choice="Dimmable light">
            <choice>Dimmable headlight</choice>
          </enumChoice>
          <enumChoice choice="Mars light">
            <choice>Mars light</choice>
          </enumChoice>
          <enumChoice choice="Pyle Gyralite">
            <choice>Pyle Gyralite</choice>
          </enumChoice>
          <enumChoice choice="Oscillating light">
            <choice>Oscillating headlight</choice>
          </enumChoice>
          <enumChoice choice="Single flash strobe">
            <choice>Single flash strobe</choice>
          </enumChoice>
          <enumChoice choice="Double flash strobe">
            <choice>Double flash strobe</choice>
          </enumChoice>
          <enumChoice choice="D312 rotary beacon">
            <choice>D312 rotary beacon</choice>
          </enumChoice>
          <enumChoice choice="Prime Stratolite">
            <choice>Prime Stratolite</choice>
          </enumChoice>
          <enumChoice choice="Type I ditch light">
            <choice>Type I ditch light</choice>
          </enumChoice>
          <enumChoice choice="Type II ditch light">
            <choice>Type II ditch light</choice>
          </enumChoice>
          <enumChoice choice="FRED (end of train flasher)">
            <choice>FRED (end of train flasher)</choice>
          </enumChoice>
          <enumChoice choice="Engine exhaust flicker">
            <choice>Engine exhaust flicker</choice>
          </enumChoice>
          <enumChoice choice="Firebox flicker">
            <choice>Firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Smart firebox flicker">
            <choice>Smart firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Dyno-light">
            <choice>Dyno-light</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Effect Selection</label>
      </variable>
      <variable label="Headlight F0(f) Phase Selection" CV="49" mask="XXXVXXXX" tooltip="Alters the timing of the effect so that it's 180 degrees out of phase with the other effects">
        <enumVal>
          <enumChoice choice="Use phase A (normal)">
            <choice>Use phase A (normal)</choice>
          </enumChoice>
          <enumChoice choice="Use phase B (opposite)">
            <choice>Use phase B (opposite)</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Phase Selection</label>
      </variable>
      <variable label="Headlight F0(f) Grade Crossing Logic" CV="49" mask="XXVXXXXX" tooltip="Causes the lighting effect to become active only when the horn has been sounded">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled when horn is ON">
            <choice>Enabled when horn is ON</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Grade Crossing Logic</label>
      </variable>
      <variable label="Headlight F0(f) Rule 17 Mode" CV="49" mask="XVXXXXXX" tooltip="Selects mapping for white wire">
        <enumVal>
          <enumChoice choice="Disabled (Headlight mapping)">
            <choice>Disabled (Headlight mapping)</choice>
          </enumChoice>
          <enumChoice choice="Enabled (FX5 mapping)">
            <choice>Enabled (FX5 mapping)</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Rule 17 Mode</label>
      </variable>
      <variable label="Headlight F0(f) Light Type" CV="49" mask="VXXXXXXX" default="0" include="MT4,N_Chal" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Light Type</label>
      </variable>
      <variable label="Headlight F0(f) Light Type" CV="49" mask="VXXXXXXX" default="1" include="BB" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>Headlight F0(f) Light Type</label>
      </variable>
      <variable label="Backup Light F0(r) Effect Selection" CV="50" mask="XXXXVVVV" default="15" tooltip="Determines the effect generated from the backup light">
        <enumVal>
          <enumChoice choice="On/Off">
            <choice>On/Off</choice>
          </enumChoice>
          <enumChoice choice="Dimmable light">
            <choice>Dimmable backup light</choice>
          </enumChoice>
          <enumChoice choice="Mars light">
            <choice>Mars light</choice>
          </enumChoice>
          <enumChoice choice="Pyle Gyralite">
            <choice>Pyle Gyralite</choice>
          </enumChoice>
          <enumChoice choice="Oscillating light">
            <choice>Oscillating backup light</choice>
          </enumChoice>
          <enumChoice choice="Single flash strobe">
            <choice>Single flash strobe</choice>
          </enumChoice>
          <enumChoice choice="Double flash strobe">
            <choice>Double flash strobe</choice>
          </enumChoice>
          <enumChoice choice="D312 rotary beacon">
            <choice>D312 rotary beacon</choice>
          </enumChoice>
          <enumChoice choice="Prime Stratolite">
            <choice>Prime Stratolite</choice>
          </enumChoice>
          <enumChoice choice="Type I ditch light">
            <choice>Type I ditch light</choice>
          </enumChoice>
          <enumChoice choice="Type II ditch light">
            <choice>Type II ditch light</choice>
          </enumChoice>
          <enumChoice choice="FRED (end of train flasher)">
            <choice>FRED (end of train flasher)</choice>
          </enumChoice>
          <enumChoice choice="Engine exhaust flicker">
            <choice>Engine exhaust flicker</choice>
          </enumChoice>
          <enumChoice choice="Firebox flicker">
            <choice>Firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Smart firebox flicker">
            <choice>Smart firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Dyno-light">
            <choice>Dyno-light</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Effect Selection</label>
      </variable>
      <variable label="Backup Light F0(r) Phase Selection" CV="50" mask="XXXVXXXX" tooltip="Alters the timing of the effect so that it's 180 degrees out of phase with the other effects">
        <enumVal>
          <enumChoice choice="Use phase A (normal)">
            <choice>Use phase A (normal)</choice>
          </enumChoice>
          <enumChoice choice="Use phase B (opposite)">
            <choice>Use phase B (opposite)</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Phase Selection</label>
      </variable>
      <variable label="Backup Light F0(r) Grade Crossing Logic" CV="50" mask="XXVXXXXX" tooltip="Causes the lighting effect to become active only when the horn has been sounded">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled when horn is ON">
            <choice>Enabled when horn is ON</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Grade Crossing Logic</label>
      </variable>
      <variable label="Backup Light F0(r) Rule 17 Mode" CV="50" mask="XVXXXXXX" tooltip="Selects mapping for yellow wire">
        <enumVal>
          <enumChoice choice="Disabled (Backup Light mapping)">
            <choice>Disabled (Backup Light mapping)</choice>
          </enumChoice>
          <enumChoice choice="Enabled (FX6 mapping)">
            <choice>Enabled (FX6 mapping)</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Rule 17 Mode</label>
      </variable>
      <variable label="Backup Light F0(r) Light Type" CV="50" mask="VXXXXXXX"  default="0" include="MT4" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Light Type</label>
      </variable>
      <variable label="Backup Light F0(r) Light Type" CV="50" mask="VXXXXXXX" default="1" include="BB,N_Chal" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>Backup Light F0(r) Light Type</label>
      </variable>
      <variable label="FX5 Effect Selection" CV="51" mask="XXXXVVVV" default="0" minOut="3" tooltip="Determines the effect generated from the FX5 light output">
        <enumVal>
          <enumChoice choice="On/Off">
            <choice>On/Off</choice>
          </enumChoice>
          <enumChoice choice="Dimmable light">
            <choice>Dimmable light</choice>
          </enumChoice>
          <enumChoice choice="Mars light">
            <choice>Mars light</choice>
          </enumChoice>
          <enumChoice choice="Pyle Gyralite">
            <choice>Pyle Gyralite</choice>
          </enumChoice>
          <enumChoice choice="Oscillating light">
            <choice>Oscillating light</choice>
          </enumChoice>
          <enumChoice choice="Single flash strobe">
            <choice>Single flash strobe</choice>
          </enumChoice>
          <enumChoice choice="Double flash strobe">
            <choice>Double flash strobe</choice>
          </enumChoice>
          <enumChoice choice="D312 rotary beacon">
            <choice>D312 rotary beacon</choice>
          </enumChoice>
          <enumChoice choice="Prime Stratolite">
            <choice>Prime Stratolite</choice>
          </enumChoice>
          <enumChoice choice="Type I ditch light">
            <choice>Type I ditch light</choice>
          </enumChoice>
          <enumChoice choice="Type II ditch light">
            <choice>Type II ditch light</choice>
          </enumChoice>
          <enumChoice choice="FRED (end of train flasher)">
            <choice>FRED (end of train flasher)</choice>
          </enumChoice>
          <enumChoice choice="Engine exhaust flicker">
            <choice>Engine exhaust flicker</choice>
          </enumChoice>
          <enumChoice choice="Firebox flicker">
            <choice>Firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Smart firebox flicker">
            <choice>Smart firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Dyno-light">
            <choice>Dyno-light</choice>
          </enumChoice>
        </enumVal>
        <label>FX5 Effect Selection</label>
      </variable>
      <variable label="FX5 Phase Selection" CV="51" mask="XXXVXXXX" minOut="3" tooltip="Alters the timing of the effect so that it's 180 degrees out of phase with the other effects">
        <enumVal>
          <enumChoice choice="Use phase A (normal)">
            <choice>Use phase A (normal)</choice>
          </enumChoice>
          <enumChoice choice="Use phase B (opposite)">
            <choice>Use phase B (opposite)</choice>
          </enumChoice>
        </enumVal>
        <label>FX5 Phase Selection</label>
      </variable>
      <variable label="FX5 Grade Crossing Logic" CV="51" mask="XXVXXXXX" minOut="3" tooltip="Causes the lighting effect to become active only when the horn has been sounded">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled when horn is ON">
            <choice>Enabled when horn is ON</choice>
          </enumChoice>
        </enumVal>
        <label>FX5 Grade Crossing Logic</label>
      </variable>
      <variable label="FX5 Rule 17 Mode" CV="51" mask="XVXXXXXX" minOut="3" tooltip="Selects mapping for brown wire">
        <enumVal>
          <enumChoice choice="Disabled (FX5 mapping)">
            <choice>Disabled (FX5 mapping)</choice>
          </enumChoice>
          <enumChoice choice="Enabled (Headlight mapping)">
            <choice>Enabled (Headlight mapping)</choice>
          </enumChoice>
        </enumVal>
        <label>FX5 Rule 17 Mode</label>
      </variable>
      <variable label="FX5 Light Type" CV="51" mask="VXXXXXXX" minOut="3" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>FX5 Light Type</label>
      </variable>
      <variable label="FX6 Effect Selection" CV="52" mask="XXXXVVVV" default="0" minOut="4" tooltip="Determines the effect generated from the FX6 light output">
        <enumVal>
          <enumChoice choice="On/Off">
            <choice>On/Off</choice>
          </enumChoice>
          <enumChoice choice="Dimmable light">
            <choice>Dimmable light</choice>
          </enumChoice>
          <enumChoice choice="Mars light">
            <choice>Mars light</choice>
          </enumChoice>
          <enumChoice choice="Pyle Gyralite">
            <choice>Pyle Gyralite</choice>
          </enumChoice>
          <enumChoice choice="Oscillating light">
            <choice>Oscillating light</choice>
          </enumChoice>
          <enumChoice choice="Single flash strobe">
            <choice>Single flash strobe</choice>
          </enumChoice>
          <enumChoice choice="Double flash strobe">
            <choice>Double flash strobe</choice>
          </enumChoice>
          <enumChoice choice="D312 rotary beacon">
            <choice>D312 rotary beacon</choice>
          </enumChoice>
          <enumChoice choice="Prime Stratolite">
            <choice>Prime Stratolite</choice>
          </enumChoice>
          <enumChoice choice="Type I ditch light">
            <choice>Type I ditch light</choice>
          </enumChoice>
          <enumChoice choice="Type II ditch light">
            <choice>Type II ditch light</choice>
          </enumChoice>
          <enumChoice choice="FRED (end of train flasher)">
            <choice>FRED (end of train flasher)</choice>
          </enumChoice>
          <enumChoice choice="Engine exhaust flicker">
            <choice>Engine exhaust flicker</choice>
          </enumChoice>
          <enumChoice choice="Firebox flicker">
            <choice>Firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Smart firebox flicker">
            <choice>Smart firebox flicker</choice>
          </enumChoice>
          <enumChoice choice="Dyno-light">
            <choice>Dyno-light</choice>
          </enumChoice>
        </enumVal>
        <label>FX6 Effect Selection</label>
      </variable>
      <variable label="FX6 Phase Selection" CV="52" mask="XXXVXXXX" minOut="4" tooltip="Alters the timing of the effect so that it's 180 degrees out of phase with the other effects">
        <enumVal>
          <enumChoice choice="Use phase A (normal)">
            <choice>Use phase A (normal)</choice>
          </enumChoice>
          <enumChoice choice="Use phase B (opposite)">
            <choice>Use phase B (opposite)</choice>
          </enumChoice>
        </enumVal>
        <label>FX6 Phase Selection</label>
      </variable>
      <variable label="FX6 Grade Crossing Logic" CV="52" mask="XXVXXXXX" minOut="4" tooltip="Causes the lighting effect to become active only when the horn has been sounded">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled when horn is ON">
            <choice>Enabled when horn is ON</choice>
          </enumChoice>
        </enumVal>
        <label>FX6 Grade Crossing Logic</label>
      </variable>
      <variable label="FX6 Rule 17 Mode" CV="52" mask="XVXXXXXX" minOut="4" tooltip="Selects mapping for green wire">
        <enumVal>
          <enumChoice choice="Disabled (FX6 mapping)">
            <choice>Disabled (FX6 mapping)</choice>
          </enumChoice>
          <enumChoice choice="Enabled (Backup Light mapping)">
            <choice>Enabled (Backup Light mapping)</choice>
          </enumChoice>
        </enumVal>
        <label>FX6 Rule 17 Mode</label>
      </variable>
      <variable label="FX6 Light Type" CV="52" mask="VXXXXXXX" minOut="4" tooltip="Provides special compensation for lighting effect contrast when using LEDs">
        <enumVal>
          <enumChoice choice="Incandescent lamp">
            <choice>Incandescent lamp</choice>
          </enumChoice>
          <enumChoice choice="LED">
            <choice>LED</choice>
          </enumChoice>
        </enumVal>
        <label>FX6 Light Type</label>
      </variable>
      <variable label="Hyperlight Flash Rate (0-15)" CV="59" mask="XXXXVVVV" default="3" comment="0 is fast, 15 is slow, 4 is recommended for start" tooltip="Sets the overall flash rate of the Hyperlight effects">
        <decVal max="15"/>
        <label>Hyperlight Flash Rate (0-15)</label>
        <comment>0 is fast, 15 is slow, 4 is recommended for start</comment>
      </variable>
      <variable label="Grade Crossing Hold Time (0-15)" CV="60" mask="XXXXVVVV" default="4" comment="0-15 seconds" tooltip="Sets the time (in seconds) an effect will stay on after the horn button is released">
        <decVal max="15"/>
        <label>Grade Crossing Hold Time (0-15)</label>
        <comment>0-15 seconds</comment>
      </variable>
      <variable label="F11 Braking Rate (0-127)" CV="61" mask="XVVVVVVV" item="Advanced Group 1 Option 6" default="0" comment="Additional braking when Fll activated (combined with CV4)" tooltip="When F11 is pressed, locos baseline braking rate is modified by this amount">
        <decVal max="127"/>
        <label>F11 Braking Rate (0-127)</label>
        <comment>Additional braking when Fll activated (combined with CV4)</comment>
      </variable>
      <variable label="F11 Braking Sign" CV="61" mask="VXXXXXXX" item="Advanced Group 1 Option 7" default="0" tooltip="Determines whether value is added to or subtracted from loco baseline braking rate">
        <enumVal>
          <enumChoice choice="Add value to baseline braking rate (increases braking delay)">
            <choice>Add value to baseline braking rate (increases braking delay)</choice>
          </enumChoice>
          <enumChoice choice="Subtract value from baseline braking rate (decreases braking delay)">
            <choice>Subtract value from baseline braking rate (decreases braking delay)</choice>
          </enumChoice>
        </enumVal>
        <label>F11 Braking Sign</label>
      </variable>
      <variable label="Transponding Control" CV="62" mask="XXXXXXXV" item="Advanced Group 1 Option 8" default="0" tooltip="Compensates for incompatibilities that may occur when using some methods of transponding">
        <enumVal>
          <enumChoice choice="Normal">
            <choice>Normal</choice>
          </enumChoice>
          <enumChoice choice="External Compatibility Mode">
            <choice>External Compatibility Mode</choice>
          </enumChoice>
        </enumVal>
        <label>Transponding Control</label>
      </variable>
      <variable label="Analog Mode Motor Start Voltage (0-255)" CV="63" item="Radio Power Conversion" default="40" tooltip="Sets the voltage difference between when the decoder first powers up and when the locomotive starts to move">
        <decVal/>
        <label>Analog Mode Motor Start Voltage (0-255)</label>
      </variable>
      <variable label="Analog Mode Max Motor Voltage (0-255)" CV="64" item="Zero-1 Power Conversion" default="180" tooltip="Sets the maximum average voltage applied to the motor when operating in analog mode">
        <decVal/>
        <label>Analog Mode Max Motor Voltage (0-255)</label>
      </variable>
      <variable label="Forward Trim (0-255)" CV="66" item="Forward Trim" default="128" tooltip="&lt;html&gt;Allows the decoders overall throttle response in the forward direction to be adjusted up or down.&lt;br&gt;     Values 1-127 will decrease motor voltage, 129-255 will increase it.  A value of zero will disable.&lt;br&gt;     Tip: this feature only active when speed tables are enabled.&lt;/html&gt;">
        <decVal/>
        <label>Forward Trim (0-255)</label>
      </variable>
      <variable label="Speed Table" CV="67">
        <speedTableVal/>
        <label>Speed Table</label>
      </variable>
      <variable label="Reverse Trim (0-255)" CV="95" item="Reverse Trim" default="128" tooltip="&lt;html&gt;Allows the decoders overall throttle response in the reverse direction to be adjusted up or down.&lt;br&gt;     Values 1-127 will decrease motor voltage, 129-255 will increase it.  A value of zero will disable.&lt;br&gt;     Tip: this feature only active when speed tables are enabled.&lt;/html&gt;">
        <decVal/>
        <label>Reverse Trim (0-255)</label>
      </variable>
      <variable label="User Identifier #1 (0-255)" CV="105" item="User Id #1" tooltip="&lt;html&gt;Use to set a custom user ID or number.  Note: when&lt;br&gt;     the decoder is reset to default values, this CV is&lt;br&gt;     preset to the softwares minor revision code.&lt;/html&gt;">
        <decVal/>
        <label>User Identifier #1 (0-255)</label>
      </variable>
      <variable label="User Identifier #2 (0-255)" CV="106" item="User Id #2" tooltip="&lt;html&gt;Use to set a custom user ID or number.  Note: when&lt;br&gt;     the decoder is reset to default values, this CV is&lt;br&gt;     preset to the softwares default CV value configuration.&lt;/html&gt;">
        <decVal/>
        <label>User Identifier #2 (0-255)</label>
      </variable>
      <variable label="Air Pump 2 Enable" CV="112" mask="XXXXXXXV" item="Sound Option 1" default="0" include="MT4" tooltip="Choose whether the locomotive has one or two air pumps">
        <enumVal>
          <enumChoice choice="Single Air Pump">
            <choice>Single Air Pump</choice>
          </enumChoice>
          <enumChoice choice="Dual Air Pumps">
            <choice>Dual Air Pumps</choice>
          </enumChoice>
        </enumVal>
        <label>Air Pump 2 Enable</label>
      </variable>
      <variable label="Air Pump 2 Enable" CV="112" mask="XXXXXXXV" item="Sound Option 1" default="1" include="BB,N_Chal" tooltip="Choose whether the locomotive has one or two air pumps">
        <enumVal>
          <enumChoice choice="Single Air Pump">
            <choice>Single Air Pump</choice>
          </enumChoice>
          <enumChoice choice="Dual Air Pumps">
            <choice>Dual Air Pumps</choice>
          </enumChoice>
        </enumVal>
        <label>Air Pump 2 Enable</label>
      </variable>
      <variable label="Slip Rate Control" CV="112" mask="XXVVXXXX" item="Sound Option 2" default="0" tooltip="&lt;html&gt;Control the variation or timing syncopation when articulated exhaust&lt;br&gt;     is enabled to simulate slipping drive wheels or a double-header.&lt;/html&gt;">
        <enumVal>
          <enumChoice choice="Zero Slip Rate">
            <choice>Zero Slip Rate</choice>
          </enumChoice>
          <enumChoice choice="Slow Slip Rate">
            <choice>Slow Slip Rate</choice>
          </enumChoice>
          <enumChoice choice="Medium Slip Rate">
            <choice>Medium Slip Rate</choice>
          </enumChoice>
          <enumChoice choice="Fast Slip Rate">
            <choice>Fast Slip Rate</choice>
          </enumChoice>
        </enumVal>
        <label>Slip Rate Control</label>
      </variable>
      <variable label="Articulated Exhaust Control" CV="112" mask="XVXXXXXX" item="Sound Option 3" default="0" include="MT4" tooltip="Alters the exhaust timing to sound like a simple articulated engine when Auto Exhaust is activated.">
        <enumVal>
          <enumChoice choice="(Normal) Rod Engine Chuff">
            <choice>(Normal) Rod Engine Chuff</choice>
          </enumChoice>
          <enumChoice choice="Articulated Exhaust Chuff">
            <choice>Articulated Exhaust Chuff</choice>
          </enumChoice>
        </enumVal>
        <label>Articulated Exhaust Control</label>
      </variable>
      <variable label="Articulated Exhaust Control" CV="112" mask="XVXXXXXX" item="Sound Option 3" default="1" include="BB,N_Chal" tooltip="Alters the exhaust timing to sound like a simple articulated engine when Auto Exhaust is activated.">
        <enumVal>
          <enumChoice choice="(Normal) Rod Engine Chuff">
            <choice>(Normal) Rod Engine Chuff</choice>
          </enumChoice>
          <enumChoice choice="Articulated Exhaust Chuff">
            <choice>Articulated Exhaust Chuff</choice>
          </enumChoice>
        </enumVal>
        <label>Articulated Exhaust Control</label>
      </variable>
      <variable label="Cam Enable" CV="112" mask="VXXXXXXX" item="Sound Option 4" default="0" tooltip="When used in DCC mode, exhaust chuffs can be controlled automatically, or synced to a cam.">
        <enumVal>
          <enumChoice choice="Auto Exhaust Chuff">
            <choice>Auto Exhaust Chuff</choice>
          </enumChoice>
          <enumChoice choice="Cam Synchronized Exhaust">
            <choice>Cam Synchronized Exhaust</choice>
          </enumChoice>
        </enumVal>
        <label>Cam Enable</label>
      </variable>
      <variable label="Quiet Mode Timeout Period" CV="113" item="Sound Group 3 Option 5" default="0" tooltip="&lt;html&gt;When loco has stopped and all functions are turned off, sound effects will turn&lt;br&gt;     off automatically after timeout period has elapsed.  Set to zero to disable.&lt;/html&gt;">
        <decVal/>
        <label>Quiet Mode Timeout Period</label>
      </variable>
      <variable label="Bell Ring Rate" CV="114" mask="XXXXVVVV" item="Sound Group 3 Option 4" default="3" tooltip="Controls the speed at which the bell rings (higher no. = slower rate">
        <decVal max="15"/>
        <label>Bell Ring Rate</label>
      </variable>
<!-- Whistle Selection follows -->
      <variable label="Whistle Select" CV="115" mask="XXXXXVVV" item="Sound Option 9" default="0" include="BB" tooltip="Select the primary whistle to use">
        <enumVal>
          <enumChoice choice="Union Pacific #4018">
            <choice>Union Pacific #4018</choice>
          </enumChoice>
          <enumChoice choice="Union Pacific #3985">
            <choice>Union Pacific #3985</choice>
          </enumChoice>
          <enumChoice choice="Norfolk &amp; Western #1218">
            <choice>Norfolk &amp; Western #1218</choice>
          </enumChoice>
        </enumVal>
        <label>Whistle Select</label>
      </variable>
      <variable label="Alternate Whistle Select" CV="115" mask="XXVVVXXX" item="Sound Option 10" default="0" include="BB" tooltip="Select an alternate whistle to use">
        <enumVal>
          <enumChoice choice="Union Pacific #4018">
            <choice>Union Pacific #4018</choice>
          </enumChoice>
          <enumChoice choice="Union Pacific #3985">
            <choice>Union Pacific #3985</choice>
          </enumChoice>
          <enumChoice choice="Norfolk &amp; Western #1218">
            <choice>Norfolk &amp; Western #1218</choice>
          </enumChoice>
        </enumVal>
        <label>Alternate Whistle Select</label>
      </variable>
      <variable label="Whistle Select" CV="115" mask="XXXXXVVV" item="Sound Option 9" default="0" include="MT4" tooltip="Select the primary whistle to use">
        <enumVal>
          <enumChoice choice="Southern Pacific 6-Chime">
            <choice>Southern Pacific 6-Chime</choice>
          </enumChoice>
          <enumChoice choice="Southern Pacific #4449 (Whistle)">
            <choice>Southern Pacific #4449 (Whistle)</choice>
          </enumChoice>
          <enumChoice choice="Southern Pacific #4449 (Horn)">
            <choice>Southern Pacific #4449 (Horn)</choice>
          </enumChoice>
        </enumVal>
        <label>Whistle Select</label>
      </variable>
      <variable label="Alternate Whistle Select" CV="115" mask="XXVVVXXX" item="Sound Option 10" default="0" include="MT4" tooltip="Select an alternate whistle to use">
        <enumVal>
          <enumChoice choice="Southern Pacific 6-Chime">
            <choice>Southern Pacific 6-Chime</choice>
          </enumChoice>
          <enumChoice choice="Southern Pacific #4449 (Whistle)">
            <choice>Southern Pacific #4449 (Whistle)</choice>
          </enumChoice>
          <enumChoice choice="Southern Pacific #4449 (Horn)">
            <choice>Southern Pacific #4449 (Horn)</choice>
          </enumChoice>
        </enumVal>
        <label>Alternate Whistle Select</label>
      </variable>
      <variable label="Whistle Select" CV="115" mask="XXXXXVVV" item="Sound Option 9" default="0" include="N_Chal" tooltip="Select the primary whistle to use">
        <enumVal>
          <enumChoice choice="Union Pacific #3985">
            <choice>Union Pacific #3985</choice>
          </enumChoice>
          <enumChoice choice="Union Pacific #4018">
            <choice>Union Pacific #4018</choice>
          </enumChoice>
          <enumChoice choice="Norfolk &amp; Western #1218">
            <choice>Norfolk &amp; Western #1218</choice>
          </enumChoice>
        </enumVal>
        <label>Whistle Select</label>
      </variable>
      <variable label="Alternate Whistle Select" CV="115" mask="XXVVVXXX" item="Sound Option 10" default="0" include="N_Chal" tooltip="Select an alternate whistle to use">
        <enumVal>
          <enumChoice choice="Union Pacific #3985">
            <choice>Union Pacific #3985</choice>
          </enumChoice>
          <enumChoice choice="Union Pacific #4018">
            <choice>Union Pacific #4018</choice>
          </enumChoice>
          <enumChoice choice="Norfolk &amp; Western #1218">
            <choice>Norfolk &amp; Western #1218</choice>
          </enumChoice>
        </enumVal>
        <label>Alternate Whistle Select</label>
      </variable>
<!-- End Whistle Selection -->
      <variable label="Alternate Whistle Enable" CV="115" mask="VXXXXXXX" item="Sound Option 11" default="0" tooltip="Choose whether to use the alternate whistle or a short toot of the primary whistle">
        <enumVal>
          <enumChoice choice="Short Whistle Function">
            <choice>Short Whistle Function</choice>
          </enumChoice>
          <enumChoice choice="Alternate Whistle">
            <choice>Alternate Whistle</choice>
          </enumChoice>
        </enumVal>
        <label>Alternate Whistle Enable</label>
      </variable>
      <variable label="Engine Exhaust Control" CV="116" item="Sound Group 3 Option 3" default="100" include="MT4" tooltip="&lt;html&gt;For Auto-Exhaust synchronization, the chuff rate will be generated in proportion to the&lt;br&gt;     throttle setting.  Higher values = higher chuff rates; use zero to disable exhaust sound.&lt;/html&gt;">
        <decVal max="255"/>
        <label>Engine Exhaust Control</label>
      </variable>
      <variable label="Engine Exhaust Control" CV="116" item="Sound Group 3 Option 3" default="110" include="N_Chal" tooltip="&lt;html&gt;For Auto-Exhaust synchronization, the chuff rate will be generated in proportion to the&lt;br&gt;     throttle setting.  Higher values = higher chuff rates; use zero to disable exhaust sound.&lt;/html&gt;">
        <decVal max="255"/>
        <label>Engine Exhaust Control</label>
      </variable>
      <variable label="Engine Exhaust Control" CV="116" item="Sound Group 3 Option 3" default="165" include="BB" tooltip="&lt;html&gt;For Auto-Exhaust synchronization, the chuff rate will be generated in proportion to the&lt;br&gt;     throttle setting.  Higher values = higher chuff rates; use zero to disable exhaust sound.&lt;/html&gt;">
        <decVal max="255"/>
        <label>Engine Exhaust Control</label>
      </variable>
<!-- Volume Controls follow -->
      <variable label="Master Volume Control" CV="128" mask="VVVVVVVV" item="Sound Setting 1" default="192" include="BB,N_Chal" tooltip="Sets the overall volume of all sound channels">
        <decVal/>
        <label>Master Volume Control</label>
      </variable>
      <variable label="Master Volume Control" CV="128" mask="VVVVVVVV" item="Sound Setting 1" default="200" include="MT4" tooltip="Sets the overall volume of all sound channels">
        <decVal/>
        <label>Master Volume Control</label>
      </variable>
      <variable label="Whistle Volume" CV="129" mask="VVVVVVVV" item="Sound Setting 5" default="225" include="BB,N_Chal" tooltip="Sets the volume of the whistle">
        <decVal/>
        <label>Whistle Volume</label>
      </variable>
      <variable label="Whistle Volume" CV="129" mask="VVVVVVVV" item="Sound Setting 5" default="200" include="MT4" tooltip="Sets the volume of the whistle">
        <decVal/>
        <label>Whistle Volume</label>
      </variable>
      <variable label="Bell Volume" CV="130" mask="VVVVVVVV" item="Sound Setting 6" default="95" include="MT4,BB" tooltip="Sets the volume of the bell">
        <decVal/>
        <label>Bell Volume</label>
      </variable>
      <variable label="Bell Volume" CV="130" mask="VVVVVVVV" item="Sound Setting 6" default="128" include="N_Chal" tooltip="Sets the volume of the bell">
        <decVal/>
        <label>Bell Volume</label>
      </variable>
      <variable label="Exhaust Volume" CV="131" mask="VVVVVVVV" item="Sound Setting 7" default="40" include="MT4" tooltip="Sets the volume of the engine exhaust">
        <decVal/>
        <label>Exhaust Volume</label>
      </variable>
      <variable label="Exhaust Volume" CV="131" mask="VVVVVVVV" item="Sound Setting 7" default="180" include="N_Chal" tooltip="Sets the volume of the engine exhaust">
        <decVal/>
        <label>Exhaust Volume</label>
      </variable>
      <variable label="Exhaust Volume" CV="131" mask="VVVVVVVV" item="Sound Setting 7" default="192" include="BB" tooltip="Sets the volume of the engine exhaust">
        <decVal/>
        <label>Exhaust Volume</label>
      </variable>
      <variable label="Air Pump Volume" CV="132" mask="VVVVVVVV" item="Sound Setting 9" default="48" include="MT4,BB" tooltip="Sets the volume of the air pump">
        <decVal/>
        <label>Air Pump Volume</label>
      </variable>
      <variable label="Air Pump Volume" CV="132" mask="VVVVVVVV" item="Sound Setting 9" default="125" include="N_Chal" tooltip="Sets the volume of the air pump">
        <decVal/>
        <label>Air Pump Volume</label>
      </variable>
      <variable label="Dynamo Volume" CV="133" mask="VVVVVVVV" item="Sound Setting 10" default="64" include="MT4,BB" tooltip="Sets the volume of the dynamo (electric power generator)">
        <decVal/>
        <label>Dynamo Volume</label>
      </variable>
      <variable label="Dynamo Volume" CV="133" mask="VVVVVVVV" item="Sound Setting 10" default="100" include="N_Chal" tooltip="Sets the volume of the dynamo (electric power generator)">
        <decVal/>
        <label>Dynamo Volume</label>
      </variable>
      <variable label="Blower Volume" CV="134" mask="VVVVVVVV" item="Sound Setting 14" default="16" include="MT4,BB" tooltip="Sets the volume of the blower">
        <decVal/>
        <label>Blower Volume</label>
      </variable>
      <variable label="Blower Volume" CV="134" mask="VVVVVVVV" item="Sound Setting 14" default="140" include="N_Chal" tooltip="Sets the volume of the blower">
        <decVal/>
        <label>Blower Volume</label>
      </variable>
      <variable label="Rod Clank Volume" CV="135" mask="VVVVVVVV" item="Sound Setting 8" default="32" tooltip="Sets the volume of the rods clanking">
        <decVal/>
        <label>Rod Clank Volume</label>
      </variable>
      <variable label="Steam Release Volume" CV="136" mask="VVVVVVVV" item="Sound Setting 23" default="128" tooltip="Sets the volume of the steam release">
        <decVal/>
        <label>Steam Release Volume</label>
      </variable>
      <variable label="Coupler Volume" CV="137" mask="VVVVVVVV" item="Sound Setting 18" default="128" tooltip="Sets the volume of the couplers coupling">
        <decVal/>
        <label>Coupler Volume</label>
      </variable>
      <variable label="Brake Squeal Volume" CV="139" mask="VVVVVVVV" item="Sound Setting 16" default="128" tooltip="Sets the volume of the brakes squealing">
        <decVal/>
        <label>Brake Squeal Volume</label>
      </variable>
      <variable label="Brake Release Volume" CV="140" mask="VVVVVVVV" item="Sound Setting 17" default="64" tooltip="Sets the volume of the brakes releasing">
        <decVal/>
        <label>Brake Release Volume</label>
      </variable>
      <variable label="Snifter Valve Volume" CV="141" mask="VVVVVVVV" item="Sound Setting 22" default="64" tooltip="Sets the volume of the snifter valve">
        <decVal/>
        <label>Snifter Valve Volume</label>
      </variable>
      <variable label="Power Reverse Volume" CV="142" mask="VVVVVVVV" item="Sound Setting 12" default="64" tooltip="Sets the volume of the power reverse operating">
        <decVal/>
        <label>Power Reverse Volume</label>
      </variable>
      <variable label="Pop Valve Volume" CV="143" mask="VVVVVVVV" item="Sound Setting 24" default="128" tooltip="Sets the volume of the pop valve releasing">
        <decVal/>
        <label>Pop Valve Volume</label>
      </variable>
      <variable label="Blower Draft Volume" CV="145" mask="VVVVVVVV" item="Sound Setting 15" default="128" tooltip="Sets the volume of the blower draft">
        <decVal/>
        <label>Blower Draft Volume</label>
      </variable>
<!-- The following sounds CVs (currently) don't map to generic -->
<!-- names, e.g. in the Comprehensive.xml programmer, so they  -->
<!-- appear on pane definitions in this file -->
<!-- Equalizer Controls follow -->
      <variable label="Equalizer Control" CV="153" mask="XXXXXVVV" default="0" tooltip="Selects one of six equalizer presets or selects a user adjustable profile">
        <enumVal>
          <enumChoice choice="Flat (off)">
            <choice>Flat (off)</choice>
          </enumChoice>
          <enumChoice choice="Tiny Speaker (under 1 inch)">
            <choice>Tiny Speaker (under 1 inch)</choice>
          </enumChoice>
          <enumChoice choice="Small Speaker (1-2 inches)">
            <choice>Small Speaker (1-2 inches)</choice>
          </enumChoice>
          <enumChoice choice="Medium Speaker (2-4 inches)">
            <choice>Medium Speaker (2-4 inches)</choice>
          </enumChoice>
          <enumChoice choice="Large Speaker (over 4 inches)">
            <choice>Large Speaker (over 4 inches)</choice>
          </enumChoice>
          <enumChoice choice="Edgeport Speaker">
            <choice>Edgeport Speaker</choice>
          </enumChoice>
          <enumChoice choice="Boom Box">
            <choice>Boom Box</choice>
          </enumChoice>
          <enumChoice choice="User Adjustable">
            <choice>User Adjustable</choice>
          </enumChoice>
        </enumVal>
        <label>Equalizer Control</label>
      </variable>
<!-- Individual Cut/Boost Controls follow -->
      <variable label="62 Hz Cut/Boost" CV="154" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>62 Hz Cut/Boost</label>
      </variable>
      <variable label="125 Hz Cut/Boost" CV="155" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>125 Hz Cut/Boost</label>
      </variable>
      <variable label="250 Hz Cut/Boost" CV="156" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>250 Hz Cut/Boost</label>
      </variable>
      <variable label="500 Hz Cut/Boost" CV="157" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>500 Hz Cut/Boost</label>
      </variable>
      <variable label="1K Hz Cut/Boost" CV="158" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>1K Hz Cut/Boost</label>
      </variable>
      <variable label="2K Hz Cut/Boost" CV="159" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>2K Hz Cut/Boost</label>
      </variable>
      <variable label="4K Hz Cut/Boost" CV="160" mask="VVVVVVVV" default="128" tooltip="0 = -12dB (Cut) : 127 = 0dB (Flat) : 255 = +12dB (Boost)">
        <decVal/>
        <label>4K Hz Cut/Boost</label>
      </variable>
<!-- Reverb Section follows -->
      <variable label="Reverb Control" CV="161" mask="XXXXXVVV" default="0" tooltip="Selects one of four reverb presets or selects a user adjustable profile">
        <enumVal>
          <enumChoice choice="Reverb Disabled">
            <choice>Reverb Disabled</choice>
          </enumChoice>
          <enumChoice choice="Additional Reverb for Whistle">
            <choice>Additional Reverb for Whistle</choice>
          </enumChoice>
          <enumChoice choice="Light Reverb in Exhaust">
            <choice>Light Reverb in Exhaust</choice>
          </enumChoice>
          <enumChoice choice="Medium Reverb in Exhaust">
            <choice>Medium Reverb in Exhaust</choice>
          </enumChoice>
          <enumChoice choice="Heavy Reverb in Exhaust">
            <choice>Heavy Reverb in Exhaust</choice>
          </enumChoice>
          <enumChoice choice="Reserved (5)">
            <choice>Reserved (5)</choice>
          </enumChoice>
          <enumChoice choice="Reserved (6)">
            <choice>Reserved (6)</choice>
          </enumChoice>
          <enumChoice choice="User Adjustable">
            <choice>User Adjustable</choice>
          </enumChoice>
        </enumVal>
        <label>Reverb Control</label>
      </variable>
<!-- Individual Reverb Output Level Controls follow -->
      <variable label="Reverb Output Level" CV="162" mask="VVVVVVVV" default="128" tooltip="Specifies a percentage of the reverb output that is mixed back into the original audio signal">
        <decVal/>
        <label>Reverb Output Level</label>
      </variable>
      <variable label="Reverb Delay" CV="163" mask="VVVVVVVV" default="255" tooltip="Specifies the total reverb delay time from 0 to 64mS">
        <decVal/>
        <label>Reverb Delay</label>
      </variable>
      <variable label="Reverb Gain" CV="164" mask="VVVVVVVV" default="64" tooltip="Specifies a percentage of the reverb output that is mixed back into the delay line">
        <decVal/>
        <label>Reverb Gain</label>
      </variable>
      <variable label="Whistle Reverb Level" CV="169" mask="VVVVVVVV" default="0" tooltip="Sets the percentage of the whistle signal level to mix into the reverb input">
        <decVal/>
        <label>Whistle Reverb Level</label>
      </variable>
      <variable label="Bell Reverb Level" CV="170" mask="VVVVVVVV" default="0" tooltip="Sets the percentage of the bell signal level to mix into the reverb input">
        <decVal/>
        <label>Bell Reverb Level</label>
      </variable>
      <variable label="Exhaust Reverb Level" CV="171" mask="VVVVVVVV" default="0" tooltip="Sets the percentage of the locomotive exhaust signal level to mix into the reverb input">
        <decVal/>
        <label>Exhaust Reverb Level</label>
      </variable>
      <variable label="Air Pump Reverb Level" CV="172" mask="VVVVVVVV" default="0" tooltip="Sets the percentage of the air pump signal level to mix into the reverb input">
        <decVal/>
        <label>Air Pump Reverb Level</label>
      </variable>
<!-- Dynamic Digital Exhaust Controls follow -->
      <variable label="Throttle Gain" CV="177" mask="VVVVVVVV" default="10" tooltip="&lt;html&gt;Specifies the DDE sensitivity to the difference between the throttle&lt;br&gt;     setting and the actual locomotive speed.  Set to zero to disable.&lt;/html&gt;">
        <decVal/>
        <label>Throttle Gain</label>
      </variable>
      <variable label="Motor Load Gain" CV="178" mask="VVVVVVVV" default="32" tooltip="Specifies the DDE sensitivity to changes in the motor load.  Set to zero to disable.">
        <decVal/>
        <label>Motor Load Gain</label>
      </variable>
      <variable label="Attack Time Constant" CV="179" mask="VVVVVVVV" default="10" tooltip="&lt;html&gt;Determines the amount of time needed before the DDE processor will begin reshaping &lt;br&gt;     the audio signal once the motor or throttle input signal has begun to change.&lt;/html&gt;">
        <decVal max="255"/>
        <label>Attack Time Constant</label>
      </variable>
      <variable label="Release Time Constant" CV="180" mask="VVVVVVVV" default="10" tooltip="&lt;html&gt;Determines the amount of time needed before the DDE processor will stop reshaping&lt;br&gt;     the audio signal after the motor or throttle input signal has returned to normal.&lt;/html&gt;">
        <decVal/>
        <label>Release Time Constant</label>
      </variable>
      <variable label="Exhaust Low Volume Limit" CV="181" mask="VVVVVVVV" default="255" tooltip="&lt;html&gt;Sets the maximum attenuation level of the exhaust sound when the&lt;br&gt;     locomotive is under light load.  (higher no. = greater attenuation)&lt;/html&gt;">
        <decVal/>
        <label>Exhaust Low Volume Limit</label>
      </variable>
      <variable label="Exhaust High Volume Limit" CV="182" mask="VVVVVVVV" default="255" tooltip="&lt;html&gt;Sets the maximum volume level of the exhaust sound when the&lt;br&gt;     locomotive is under heavy load.  (higher no. = greater volume)&lt;/html&gt;">
        <decVal/>
        <label>Exhaust High Volume Limit</label>
      </variable>
      <variable label="Side Rod Clank Low Volume Limit" CV="183" mask="VVVVVVVV" default="255" tooltip="&lt;html&gt;Sets the maximum attenuation level of the side rod clanking sound when&lt;br&gt;     the locomotive is under heavy load.  (higher no. = greater attenuation)&lt;/html&gt;">
        <decVal/>
        <label>Side Rod Clank Low Volume Limit</label>
      </variable>
      <variable label="Side Rod Clank High Volume Limit" CV="184" mask="VVVVVVVV" default="255" tooltip="&lt;html&gt;Sets the maximum volume level of the side rod clanking sound when&lt;br&gt;     the locomotive is under light load.  (higher no. = greater volume)&lt;/html&gt;">
        <decVal/>
        <label>Side Rod Clank High Volume Limit</label>
      </variable>
      <variable label="DDE Filter Initial Frequency" CV="185" mask="VVVVVVVV" default="42" tooltip="Specifies the initial frequency of the DDE filter bank.  (higher no. = higher frequency)">
        <decVal/>
        <label>DDE Filter Initial Frequency</label>
      </variable>
      <variable label="DDE Filter Control Gain" CV="186" mask="VVVVVVVV" default="64" tooltip="&lt;html&gt;Determines the sensitivity of the DDE filter bank to changes&lt;br&gt;     in load and speed.  (higher no. = greater sensitivity)&lt;/html&gt;">
        <decVal max="255"/>
        <label>DDE Filter Control Gain</label>
      </variable>
      <variable label="DDE Filter Damping" CV="187" mask="VVVVVVVV" default="255" tooltip="Sets the overall damping ratio of the DDE Filter Bank.">
        <decVal/>
        <label>DDE Filter Damping</label>
      </variable>
      <variable label="DDE Tracking Coefficient" CV="188" mask="VVVVVVVV" default="102" tooltip="&lt;html&gt;Sets the no load sense level for the DDE controller when&lt;br&gt;     back-EMF is disabled, as a percentage of the track voltage.&lt;/html&gt;">
        <decVal/>
        <label>DDE Tracking Coefficient</label>
      </variable>
<!-- Automatic Sound Controls (ASC) follow -->
      <variable label="Bell-On Set Point" CV="193" mask="XVVVVVVV" default="10" tooltip="Specifies the throttle speed step where the automatic bell will first turn on">
        <decVal max="127"/>
        <label>Bell-On Set Point</label>
      </variable>
      <variable label="Bell-Off Set Point" CV="194" mask="XVVVVVVV" default="30" tooltip="Specifies the throttle speed step where the automatic bell will turn off">
        <decVal max="127"/>
        <label>Bell-Off Set Point</label>
      </variable>
      <variable label="Grade Crossing Whistle Sensitivity" CV="195" mask="VVVVVVVV" default="4" tooltip="Specifies the positive rate of throttle change needed to activate the automatic grade crossing whistle">
        <decVal/>
        <label>Grade Crossing Whistle Sensitivity</label>
      </variable>
      <variable label="Brake Squeal Sensitivity" CV="196" mask="VVVVVVVV" default="3" tooltip="Specifies the negative rate of throttle change needed to activate the automatic brake squeal">
        <decVal/>
        <label>Brake Squeal Sensitivity</label>
      </variable>
      <variable label="Automatic Grade Crossing Whistle Enable (Analog Mode)" CV="197" mask="XXXXXXXV" default="0" tooltip="Enables the Automatic Grade Crossing Whistle in Analog Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Grade Crossing Whistle Enable (Analog Mode)</label>
      </variable>
      <variable label="Automatic Whistle Signal Enable (Analog Mode)" CV="197" mask="XXXXXXVX" default="0" tooltip="Enables the Automatic Whistle Signal in Analog Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Whistle Signal Enable (Analog Mode)</label>
      </variable>
      <variable label="Automatic Bell Enable (Analog Mode)" CV="197" mask="XXXXXVXX" default="0" tooltip="Enables the Automatic Bell in Analog Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Bell Enable (Analog Mode)</label>
      </variable>
      <variable label="Automatic Brake Squeal Enable (Analog Mode)" CV="197" mask="XXXXVXXX" default="0" tooltip="Enables the Automatic Brake Squeal in Analog Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Brake Squeal Enable (Analog Mode)</label>
      </variable>
      <variable label="Automatic Steam Blow Down Enable (Analog Mode)" CV="197" mask="XXXVXXXX" default="0" tooltip="Enables the Automatic Steam Blow Down in Analog Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Steam Blow Down Enable (Analog Mode)</label>
      </variable>
      <variable label="Automatic Grade Crossing Whistle Enable" CV="198" mask="XXXXXXXV" default="0" tooltip="Enables the Automatic Grade Crossing Whistle in Digital Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Grade Crossing Whistle Enable</label>
      </variable>
      <variable label="Automatic Whistle Signal Enable" CV="198" mask="XXXXXXVX" default="0" tooltip="Enables the Automatic Whistle Signal in Digital Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Whistle Signal Enable</label>
      </variable>
      <variable label="Automatic Bell Enable" CV="198" mask="XXXXXVXX" default="0" tooltip="Enables the Automatic Bell in Digital Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Bell Enable</label>
      </variable>
      <variable label="Automatic Brake Squeal Enable" CV="198" mask="XXXXVXXX" default="0" tooltip="Enables the Automatic Brake Squeal in Digital Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Brake Squeal Enable</label>
      </variable>
      <variable label="Automatic Steam Blow Down Enable" CV="198" mask="XXXVXXXX" default="0" tooltip="Enables the Automatic Steam Blow Down in Digital Mode">
        <enumVal>
          <enumChoice choice="Disabled">
            <choice>Disabled</choice>
          </enumChoice>
          <enumChoice choice="Enabled">
            <choice>Enabled</choice>
          </enumChoice>
        </enumVal>
        <label>Automatic Steam Blow Down Enable</label>
      </variable>
<!-- Event Probability Controls follow -->
      <variable label="Probability Fireman Shovels Coal" CV="201" mask="VVVVVVVV" default="0" tooltip="Sets the probability that the fireman will shovel some coal.">
        <decVal max="255"/>
        <label>Probability Fireman Shovels Coal</label>
      </variable>
      <variable label="Probability Fireman Fills the Tender" CV="202" mask="VVVVVVVV" default="32" tooltip="Sets the probability that the fireman will fill the tender with water.">
        <decVal max="255"/>
        <label>Probability Fireman Fills the Tender</label>
      </variable>
      <variable label="Probability Fireman Turns His Wrench" CV="203" mask="VVVVVVVV" default="16" tooltip="Sets the probability that the fireman will use his wrench.">
        <decVal max="255"/>
        <label>Probability Fireman Turns His Wrench</label>
      </variable>
      <variable label="Probability Fireman Uses His Grease Gun" CV="204" mask="VVVVVVVV" default="32" tooltip="Sets the probability that the fireman will use the grease gun.">
        <decVal max="255"/>
        <label>Probability Fireman Uses His Grease Gun</label>
      </variable>
      <variable label="Probability Fireman Uses His Oil Can" CV="205" mask="VVVVVVVV" default="64" tooltip="Sets the probability that the fireman will use the oil can.">
        <decVal max="255"/>
        <label>Probability Fireman Uses His Oil Can</label>
      </variable>
      <variable label="Probability Fireman Uses the Injector" CV="206" mask="VVVVVVVV" default="64" tooltip="Sets the probability that the fireman will use the water injector.">
        <decVal max="255"/>
        <label>Probability Fireman Uses the Injector</label>
      </variable>
      <variable label="Probability Fireman Uses the Blower" CV="207" mask="VVVVVVVV" default="64" tooltip="Sets the probability that the fireman will use the firebox blower.">
        <decVal max="255"/>
        <label>Probability Fireman Uses the Blower</label>
      </variable>
      <variable label="Probability Pop Valve Blows Off" CV="208" mask="VVVVVVVV" default="0" tooltip="Sets the probability that the safety valve will relieve.">
        <decVal max="255"/>
        <label>Probability Pop Valve Blows Off</label>
      </variable>
<!-- End of variables for file-specific panes -->
<!-- Advanced Motor Control Features follow -->
      <variable label="Motor Kp Coefficient (0-255)" CV="209" mask="VVVVVVVV" item="Advanced Group 2 Option 1" default="25" tooltip="Specifies a gain factor for the proportional part of the PID motor control equation">
        <decVal/>
        <label>Motor Kp Coefficient (0-255)</label>
      </variable>
      <variable label="Motor Ki Coefficient (0-255)" CV="210" mask="VVVVVVVV" item="Advanced Group 2 Option 2" default="20" tooltip="Specifies a gain factor for the integral part of the PID motor control equation">
        <decVal/>
        <label>Motor Ki Coefficient (0-255)</label>
      </variable>
      <variable label="Motor Control Intensity (0-255)" CV="212" mask="VVVVVVVV" item="Advanced Group 2 Option 3" default="255" include="BB" tooltip="The CV value is interpreted as n/32 that is fed back from the control loop">
        <decVal/>
        <label>Motor Control Intensity (0-255)</label>
      </variable>
      <variable label="Motor Control Intensity (0-255)" CV="212" mask="VVVVVVVV" item="Advanced Group 2 Option 3" default="128" include="MT4,N_Chal" tooltip="The CV value is interpreted as n/32 that is fed back from the control loop">
        <decVal/>
        <label>Motor Control Intensity (0-255)</label>
      </variable>
      <variable label="Motor Control Sample Period (0-31)" CV="213" mask="VVVVVVVV" item="Advanced Group 2 Option 4" default="15" tooltip="Specifies the time period in mS (milliseconds) between measurements">
        <decVal max="31"/>
        <label>Motor Control Sample Period (0-31)</label>
      </variable>
      <variable label="Motor Control Sample Aperture Time (0-255)" CV="214" mask="VVVVVVVV" item="Advanced Group 2 Option 5" default="15" tooltip="Specifies a gain factor for the derivative part of the PID motor control equation">
        <decVal/>
        <label>Motor Control Sample Aperture Time (0-255)</label>
      </variable>
<!-- highest used so far: -->
<!-- "Advanced Group 1 Option 8" -->
<!-- "Advanced Group 2 Option 5" -->
<!-- "Sound Option 4" -->
<!-- "Sound Group 1 Option (none yet)" -->
<!-- "Sound Group 2 Option (none yet)" -->
<!-- "Sound Setting 29 (several intermediate nos. available)" -->
    </variables>
    <resets>
      <factReset label="Reset all CVs to factory defaults" CV="8" default="8"/>
    </resets>
  </decoder>
  
  <xi:include href="http://jmri.org/xml/decoders/soundtraxx/TSUPaneLighting.xml"/>
  <xi:include href="http://jmri.org/xml/decoders/soundtraxx/TSUPaneEqualizer.xml"/>
  <xi:include href="http://jmri.org/xml/decoders/soundtraxx/TSUPaneReverb.xml"/>
  <xi:include href="http://jmri.org/xml/decoders/soundtraxx/TSUPaneDDE.xml"/>
  <xi:include href="http://jmri.org/xml/decoders/soundtraxx/TSUPaneASCsteam.xml"/>
  
</decoder-config>

 	  	 

