A value of 255 corresponds to full voltage available No alternate power source available Analog power supply Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Stores consist address. Range 0-127 (direction set in bit 7) Normal Reversed A consist address over 127 will also set this bit Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Respond to locomotive address only Respond to consist address Additional consist acceleration (combined with CV3) Add value to base acceleration rate (increases acceleration delay) Subtract value from base acceleration rate (decreases acceleration delay) Additional consist braking (combined with CV4) Add value to baseline braking rate (increases braking delay) Subtract value from baseline braking rate (decreases braking delay) Disabled, Speed Curves not used Disabled, Speed Curves not used Linear Speed Curve (Straight Line) Logarithmic Curve 1 Logarithmic Curve 2 Logarithmic Curve 3 Logarithmic Curve 4 Logarithmic Curve 5 Logarithmic Curve 6 Logarithmic Curve 7 Exponential Curve 1 Exponential Curve 2 Exponential Curve 3 Exponential Curve 4 Exponential Curve 5 Exponential Curve 6 User Defined Speed Table Forward Reverse 14 28/128 NMRA Digital Only Alternate Power Source Enabled Use Start Voltage (Vstart) Use Speed Table Use 2 digit address (primary address) Use 4 digit address (extended address) Normal operation (no locking) Enable CV Lock as set in CVs 15 and 16 Normal operation Reset all CVs to default values at next power cycle Normal Exchange Group 2 (F5-F8) and Group 3 (F9-F12) No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes On/Off Dimmable headlight Mars light Pyle Gyralite Oscillating headlight Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light Use phase A (normal) Use phase B (opposite) Disabled Enabled when horn is ON Disabled (Headlight mapping) Enabled (FX5 mapping) Incandescent lamp LED On/Off Dimmable backup light Mars light Pyle Gyralite Oscillating backup light Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light Use phase A (normal) Use phase B (opposite) Disabled Enabled when horn is ON Disabled (Backup Light mapping) Enabled (FX6 mapping) Incandescent lamp LED On/Off Dimmable light Mars light Pyle Gyralite Oscillating light Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light Don't show this for the TSU-750 models Use phase A (normal) Use phase B (opposite) Don't show this for the TSU-750 models Disabled Enabled when horn is ON Don't show this for the TSU-750 models Disabled (FX5 mapping) Enabled (Headlight mapping) Don't show this for the TSU-750 models Incandescent lamp LED Don't show this for the TSU-750 models On/Off Dimmable light Mars light Pyle Gyralite Oscillating light Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light Don't show this for the TSU-750 models Use phase A (normal) Use phase B (opposite) Don't show this for the TSU-750 models Disabled Enabled when horn is ON Don't show this for the TSU-750 models Disabled (FX6 mapping) Enabled (Backup Light mapping) Don't show this for the TSU-750 models Incandescent lamp LED Don't show this for the TSU-750 models On/Off Dimmable light Mars light Pyle Gyralite Oscillating light Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light This CV for Gas Turbine only. Don't show this for the TSU-750 models Use phase A (normal) Use phase B (opposite) This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled when horn is ON This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled (FX5 mapping) Enabled (Headlight mapping) This CV for Gas Turbine only. Don't show this for the TSU-750 models Incandescent lamp LED This CV for Gas Turbine only. Don't show this for the TSU-750 models On/Off Dimmable light Mars light Pyle Gyralite Oscillating light Single flash strobe Double flash strobe D312 rotary beacon Prime Stratolite Type I ditch light Type II ditch light FRED (end of train flasher) Engine exhaust flicker Firebox flicker Smart firebox flicker Dyno-light This CV for Gas Turbine only. Don't show this for the TSU-750 models Use phase A (normal) Use phase B (opposite) This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled when horn is ON This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled (FX6 mapping) Enabled (Backup Light mapping) This CV for Gas Turbine only. Don't show this for the TSU-750 models Incandescent lamp LED This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Disabled Enabled This CV for Gas Turbine only. Don't show this for the TSU-750 models Normal FX5 operation When FX5 is on, headlight, backup light and FX6 turn off This CV for Gas Turbine only. Don't show this for the TSU-750 models Normal FX6 operation When FX6 is on, headlight, backup light and FX5 turn off This CV for Gas Turbine only. Don't show this for the TSU-750 models 0 is fast, 15 is slow, 4 is recommended for start 0-15 seconds Additional braking when Fll activated (combined with CV4) Add value to baseline (increases braking delay) Subtract value from baseline (decreases braking delay) Normal External Compatibility Mode Turns on and off manually with a mapped function (default is F10) Turns on and off automatically with engine sound Turns on and off manually with a mapped function (default is F9) Turns on and off automatically with engine sound Diesel engine remains on when turbine is on Diesel engine turns off when turbine is on Backfire is off Backfire turns on with first startup only Backfire turns on with every startup Wabco A2 Wabco E2 Leslie A125 Leslie A200 Leslie A125+A200 Leslie S2M Leslie S3L Leslie S5T Nathan K3L Nathan M3 Nathan M5 Nathan P3 Nathan P5 (early) Holden M3H Holden K5H Hancock Air Whistle Show these horns for the models (productID) listed below Short horn blast Wabco E2 Leslie A125 Leslie A200 Leslie A125+A200 Leslie S2M Leslie S3L Leslie S5T Nathan K3L Nathan M3 Nathan M5 Nathan P3 Nathan P5 (early) Holden M3H Holden K5H Hancock Air Whistle Show these horns for the models (productID) listed below Wabco A2 Wabco E2 Leslie A200 Leslie A125+A200 Leslie S2M Leslie S3L Leslie RS3L Leslie S5T Nathan K3L Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Holden M3H Holden K5H Hancock Air Whistle Show these horns for the models (productID) listed below Short horn blast Wabco E2 Leslie A200 Leslie A125+A200 Leslie S2M Leslie S3L Leslie RS3L Leslie S5T Nathan K3L Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Holden M3H Holden K5H Hancock Air Whistle Show these horns for the models (productID) listed below Wabco E2 Leslie A125+A200 Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Nathan K3L Nathan K3LA Nathan K5LA Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Holden M3H Holden K5H Show these horns for the models (productID) listed below Short Horn Leslie A125+A200 Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Nathan K3L Nathan K3LA Nathan K5LA Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Holden M3H Holden K5H Show these horns for the models (productID) listed below Wabco E2 Leslie S2M Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Nathan K3L Nathan K3LA Nathan K5LA Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Modern) Nathan P5A Holden M3H Holden K5H Show these horns for the models (productID) listed below Short Horn Leslie S2M Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Nathan K3L Nathan K3LA Nathan K5LA Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Modern) Nathan P5A Holden M3H Holden K5H Show these horns for the models (productID) listed below RGS Goose #5 Modern Auto Horn Model T Aah-oogah Leslie A125 Leslie A200 Leslie A125+A200 Hancock Air Whistle Branta Canadensis These are the horns for the Galloping Goose Short Horn Modern Auto Horn Model T Aah-oogah Leslie A125 Leslie A200 Leslie A125+A200 Hancock Air Whistle Branta Canadensis These are the horns for the Galloping Goose Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Nathan K3L Nathan K3LA Nathan K5LA Nathan K5HL Nathan K5LLA Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Holden M3H Holden K5H Show these horns for the models (productID) listed below Short Horn Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Nathan K3L Nathan K3LA Nathan K5LA Nathan K5HL Nathan K5LLA Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Holden M3H Holden K5H Show these horns for the models (productID) listed below Nathan M3 Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Nathan K3L Nathan K3LA Nathan K5LA Nathan K5LLA Nathan K5HL Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Holden M3H Holden K5H Show these horns for the models (productID) listed below Short Horn Nathan M5 Nathan P3 Nathan P5 (Early) Nathan P5A Nathan K3L Nathan K3LA Nathan K5LA Nathan K5LLA Nathan K5HL Leslie S3L Leslie RS3L Leslie S5T Leslie RS5T Holden M3H Holden K5H Show these horns for the models (productID) listed below Manual notching, engine RPM controlled by F9/F10 Engine RPM increases at each speed step Engine RPM increases every 2 speed steps Engine RPM increases every 3 speed steps Engine RPM increases every 4 speed steps Engine RPM increases every 5 speed steps Engine RPM increases every 6 speed steps Engine RPM increases every 7 speed steps Engine RPM increases every 8 speed steps Engine RPM increases every 9 speed steps Engine RPM increases every 10 speed steps Engine RPM increases every 11 speed steps Engine RPM increases every 12 speed steps Engine RPM increases every 13 speed steps Engine RPM increases every 14 speed steps Engine RPM increases every 15 speed steps Interlock is disabled Under manual control, locomotive will not move until engine starts Prime mover starts up at speed step 1 Prime mover starts up when power is supplied to track Dynamic Brakes operate independently of engine RPMs Turning on Dynamic Brakes forces engine RPMs to drop to idle Turning on Dynamic Brakes forces engine RPMs to drop to notch 4 Turning on Dynamic Brakes forces engine RPMs to full speed Dynamic brakes on with function F4 Turning on dynamic brakes forces diesel engine RPMs to drop to notch 2 and shuts the turbine OFF Turbine drops to idle before dynamic brakes active Flat (off) Tiny Speaker (under 1 inch) Small Speaker (1-2 inches) Medium Speaker (2-4 inches) Large Speaker (over 4 inches) Edgeport Speaker Boom Box User Adjustable Reverb Disabled Additional Reverb for Horn Light Reverb in Exhaust Medium Reverb in Exhaust Heavy Reverb in Exhaust Reserved (5) Reserved (6) User Adjustable Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled