Short Address Start Voltage Acceleration Deceleration Top Voltage Linear Slow increase at slow speed Fast increase at slow speed Speed Curve Select Version ID Manufacturer ID Long Address Advanced Consist address Normal Reversed Locomotive Direction In Consist Functions respond to Locomotive Address Only Functions respond to Consist Address Only Consist Function Forward Reverse Normal direction of motion 14 28/128 (recommended) Speed Steps Off On Analog Conversion Mode Don't use Speed Table Use Speed Table Use Speed Table 2 digit addressing 4 digit addressing Addressing Mode Horn type Range 0-16 Horn volume Range 0-3 Bell type Range 0-6 Bell volume Range 0-7 Bell ring rate Range 0-50 Diesel rumble volume Range 0-3 Brake squeal volume Range 0-3 Dynamic brake volume Range 0-3 Air release volume Range 0-3 Air pump volume Range 0-3 Safety pop value volume Range 0-3 Engine cooling fan volume Range 0-3 Coupling volume Range 0-3 Random noise volume Range 0-3 Rail wheel clack Range 0-3 Speed Table User ID #1 Range 0-255 User ID #2 Range 0-255 Coupling fire volume Range 0-3 Brake release volume Range 0-3 Off On Auto Brake squeal enable/disable Off Type 1 Type 2 Coupling Sound Type Off Auto notch - RPM and notch synchro to speed Linear notch - RPM synchro to speed Manual notch - notch up/down with F8/F9 Diesel notch mode SD EMD GP Other Diesel rumble type MRC NOTE: Mfg. recognizes CV read back is not 100% correct. MRC NOTE: Some DCC systems do not have enough power on the program track for programming sound decoders. If your system is one of these, There are Program Track Boosters availlable from aftermarket DCC suppliers. MRC